BasiX 3 Elite Flex USER’S MANUAL AND MAINTENANCE GUIDE

General information Manufacturer Equipment intended use and description storage Symbols Special warnings and use restrictions Starting up Setting up and adjustments Transportation and brakes Use en setting up accessories Cleaning and conservation Maintenance Preventive maintenance Corrective maintenance Spare parts Troubleshooting Technical data sheet Warranty Service record 1. GENERAL INFORMATION MANUFACTURER Wesseling BV, Venenweg 31, 1161 AK Zwanenburg, Netherlands-Tel.+31 204975183-Fax+31 204975909 – website:www.wesseling-bv.com EQUIPMENT INTENDED USE AND DESCRIPTION The BasiX tables are...

2. SPECIAL WARNINGS AND USE RESTRICTIONS Equipment must not be used:  Without knowing the user’s manual.  When the safety load exceeds the stated capacity.  Without the patient being monitored.  When the patient and/or equipment is not stable enough.  When table is not on its feet when stopped, during treatment, or when patient is moved to/from other equipment.  When the original product has been tampered with and/or modified from its original configuration.  When the controls and/or components are even only partially faulty or defective.  When incorrectly configured or when you think...

A hydraulic table is equipped with a hydraulic pump with foot pedals on both sides of the table. The height adjustment by means of the pappels: Up:  Push down the pedals with your foot by pressing the designated footpath. Repeat until the desired height is reached. Down:  Push up the pedals with your foot by pushing the designated footpath. Keep pushing until the desired height is reached. To adjust the back section pull the control handle, and support the section as it moves. Release the handle to secure the position. The control handles are on both sides of the table. With the patient’s weight...

TRANSPORTATION AND BRAKES The table has four swivel wheels to allow movements in tight spaces. At the back-side of the table is the stirrup bar of the wheel-lift system. By pushing this stirrup bar downwards the table becomes mobile. Lift the stirrup bar upwards again after reaching the required position so the castors will be retracted. Never use the table if the castors are not fully retracted! The 4 feet can be adjusted individually when the floor is not even. MOVING THE TABLE PROCEDURE To move the table use the foot to push down the bar till it stops. To put the table on its feet use the...

By choosing to barswitch-system the standard switch will not be on the table. By pushing the bars which are located on both sides of the table, you can adjust the height of the table. Adjusting the height from the side:  Push down one of the bars to let the table go down. Stop pushing when you have reached the desired height.  Push up one of the bars to let the table go up. Stop pushing when you have reached the desired height.  The barswitch-system can also be activated when sitting at the head-section. The two special made bars s work in opposite direction that the bars on the side. This...

Standard the table is mounted with one switch of choice. We can equip the table with multiple switches. If you choose for an extra foot switch, you also need a link to connect two switches on the motor. If this option is chosen, the link (Y-cable) and the extra switch will assembled on the table before delivery. Each Praxis can be mounted with a head-section with cut-out. When choosing this option there will be a plug in the color of the table to fill the cut-out. The standard parts are filled with polyether and are about 55mm thick. When the optional Lazy Foam is chosen the total thickness is...

MOTSL95: Extra strong actuator with max. 12.000N MOTSL95: Extra fast actuator max. 14 mm/s The table is standard equipped with an actuator with a force of 8.000N at a rate of 7.5 mm / s. We can adjust, by means of the placement of a different actuator, the speed and / or the force. The choices are as followed 8.000N = 14 mm/s 10.000N = 10 mm/s 12.000N = 8 mm/s 5. CLEANING and CONSERVATION For durable joy with the leather material, please clean regularly. For cleaning use a cloth or soft brush dampened using water and a neutral detergent. Any stains on the upholstery should be promptly removed...

7. TROUBLESHOOTING DIRECT E-MAIL FOR TECHNICAL OR USERS ASSISTANCE: [email protected] If you rather want to speak to one of us on the phone you can call: +31-20 497 5183 Please note:  Before contacting for service or help, please identify the "SERIAL NUMBER" in the product label attached to the equipment (see example above), or the transport document/invoice number. This will speed things up and improve service quality. The equipment was tested in very stringent conditions. During testing no specific breakages or faults occurred. If the equipment fails to operate, please follow the troubleshooting...

8. TECHNICAL DATA SHEET Product Name Product Code Safe working load Max patient weight Height adjustment Adjustment system Adjusting electrics Sections adjusted by gas spring Head section Back section Middle section Adjusting gas spring head section Adjusting gas spring back section Adjusting gas spring middle section Wheels Braking system Equipment weight Length Width Upholstery thickness Filling Semi Leather BasiX 3 Elite Flex Electric, with or without wheels BAS3FEMWE /BAS3FEZWE 250kg 225kg 45cm to 115cm with a speed of 7,5mm/s 8.000N, 470W, 2.0Ah, stroke 300mm German electric actuators Pneumatic...

9. WARRANT GENERAL AFTER-SALES SERVICE CONDITIONS FOR WESSELING ITEMS The warranty has a 24-month validity from the date of delivery. The warranty does not cover consumable items, rechargeable batteries, and generally all the material subject to wear, breakdowns caused by knocks, falls, misuse or improper use, accidental events and transport damage. This warranty shall be automatically invalidated if the equipment is tampered with. Repair of the equipment will be carried out in relation to the breakdown stated. An estimate must be specifically requested. Payment is cash on delivery, unless other...