LOOKING FOR THE OPTIMAL RESIN CURE? THE AFFORDABLE CUREbox™ Plus DELIVERS!

Product catalog summary

Introduction
The CUREbox™ Plus by Wicked Engineering is a curing unit designed for 3D printed resins, particularly beneficial for dental laboratories and digital manufacturing. It is praised for its simplicity, cost-effectiveness, and customizable presets.

Specifications

LED Wavelength: 365/405nm
LED Output: 36 watts
Power Input: AC 110-120V 50/60HZ 3A or AC 220-240V 50/60HZ 3A
Chamber Size: 12 x 12 x 6.25 inches (300 x 300 x 160mm)
Unit Size: 12 x 12 x 10.25 inches (300 x 300 x 260mm)
Unit Weight: 22 lbs (10 kg)
Shipping Size: 16 x 16 x 14 inches (406 x 406 x 355mm)
Shipping Weight: 25 lbs (10 kg)

Features

Easy operation with one-touch presets and custom modes
Temperature control with auto start and stop
Status indicators for heat, lamps, and door
Glove-friendly touchscreen control
Large capacity chamber for high production
Low maintenance and easy to clean
Durable construction with tempered glass and stainless steel
Uniform cure and dimensional stability due to silver diffuse reflective panels
Safety interlock to prevent UV exposure when the door is opened
One-year warranty (excluding LED lamps)
Long life, replaceable UV LEDs

Qualified Resins
The CUREbox™ Plus is compatible with various resins, including Whip Mix's VeriGuide™ OS, VeriSplint™ OS, VeriModel™ OS, and Dentca's Denture Base, Denture Teeth, Denture Try-in, and Temporary Crown and Bridge. For specific curing parameters, refer to whipmix.com.

Conclusion
The CUREbox™ Plus is an optimal solution for enhancing post-processing of medical device 3D printed resins, offering a combination of advanced features, safety, and durability.

Catalog excerpts

LOOKING FOR THE OPTIMAL RESIN CURE? THE AFFORDABLE CUREbox™ Plus DELIVERS!-1

LOOKING FOR THE OPTIMAL RESIN CURE? THE AFFORDABLE ™ CUREbox Plus DELIVERS! The CUREbox™ Plus by Wicked Engineering has been a great addition to our laboratory and digital manufacturing. It’s so simple to use, cost effective and allows us to create our own custom presets. Thanks, Whip Mix, for recommending this “Wicked” gem! – Mark D. Williamson, CDT Ottawa Dental Lab

Open the catalog to page 1

LOOKING FOR THE OPTIMAL RESIN CURE? THE AFFORDABLE CUREbox™ Plus DELIVERS!-2

The CUREbox™ Plus is a large capacity curing unit for 3D printed resins. It uses a combination of 365/405nm LED lights and 80°C temperature to achieve maximum polymerization. Though the CUREbox™ Plus can cure most any resin, it has been qualified with the following resins*: Whip Mix: • VeriGuide™ OS • VeriSplint™ OS • VeriModel™ OS Dentca: • Denture Base • Denture Teeth • Denture Try-in • Temporary Crown and Bridge * Refer to whipmix.com for curing parameters. For dental labs and clinicians who need to enhance the post processing for medical device 3D printed resins. The CUREbox Plus is a post...

Open the catalog to page 2

All Whip Mix Corporation catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list