Copra Ti
Copra Ti
Titanium grades 2, 4, and 5 are used in metal discs for dental crowns and bridges. Produced by Whitepeaks Dental Solutions GmbH & Co. KG, located in Essen, Germany.
The product is a mixture primarily composed of titanium with small amounts of ferrum, carbon, nitrogen, oxygen, and hydrogen. Grade 5 also includes aluminum and vanadium.
No specific hazards are identified for human health or the environment. The product is not classified as hazardous.
No special measures required. In case of inhalation or eye contact, consult a physician if symptoms persist.
No special measures required as the product is resistant to fire and explosion.
Use protective clothing and dust extraction devices. No special environmental precautions are necessary.
No special measures required. Ensure sufficient extraction at the workstation.
Use dust masks, protective gloves, glasses, and clothing. Avoid eating, drinking, or smoking while handling the product.
Silver-grey solid, odourless, with a melting point of 1668°C. Insoluble in water.
No conditions or materials to avoid. No hazardous decomposition products.
No harmful effects if handled correctly.
Not hazardous to water, non-degradable, and no adverse effects identified.
Contact waste processors for recycling. Classified under non-ferrous metal dust and particles.
No special transport classification required.
Not subject to EC declaration rules.
This safety data sheet is based on current knowledge and does not guarantee specific product features.
Catalog excerpts
safety data sheet according to 91/155/EEC printing date: 3/17/2016 review: 14.03.2016 issued: 08.08.2014 1. identification of the substance/preparation and of the company/undertaking: 1.1 identification of the substance: titanium grade 2, grade 4 and grade 5 1.2 application / preparation: metal discs ~ 98,3 0 x 8 - 24,5mm used to produce crowns and bridges 1.3 producer / supplier: Whitepeaks Dental Solutions GmbH& Co. KG Langeheide 9, 45239 Essen - Germany phone: +49-281-206458-0 / fax: +49-281-206458-13 1.4 toxication helpdesk: Giftnotrufzentrale Berlin: 2. composition / information on ingredients chem. charactarisation: Mixture of substances listed below with nonhazardous additions. Whitepeaks Dental Solutions GmbH & Co. KG Langeheide. 9,45239 Essen
Open the catalog to page 1
additional information: The hazards in point 4 to 8 as well as 10 to 12 do not refer to the product itself, but to the dust released by processing. 3.1 hazard designation for human an environment: n.a. 3.2 hazardous / non hazardous preparation: n.a. 3.3 harmful effects to health and evironment on abuse: n.a. 3.4 other hazards based on material: n.a. no special measures are required consult a physician n.a. If swarf get into your eyes, rinse open eye for several minutes under running water. If symptoms persist consult a physician in case of discomfort consult a physician n.a....
Open the catalog to page 2
6. accidental release measures 6.1 personal precautions: common use of protective clothing, dust extractor device 6.2 environmental precautions: no special measures are required 6.3 methods of cleaning: absorption, sweep 7. handling and storage 7.1 handling: according to use instructions. To proper application no special measures required. Take care for sufficient extraction at work station no special measures required n.a. 8. exposure controls/personal protection 8.1 exposure limits: exposure 8.2.1 limitation and monitoring to exposure at work station: 8.2.1.1 respiratory...
Open the catalog to page 3
9. physical and chemical properties silver-grey Solid odourless 9.2 pH: 9.2.1 boiling point: 9.2.2 flash point: 9.2.3 autoflammability: 9.2.4 explosive properties: 9.2.5 oxidizing properties: 9.2.6 vapor pressure: 9.2.7 relative density: 9.2.8 solubility water / fat 9.2.9 partition eoefficient: 9.2.10 viscosity 9.2.11 vapor densitiy: 9.2.12 evaporation rate: n.a. n.a. n.a. n.a. this product is not explosive n.a. n.a. ~ 4,51 g/cm3 (Grade 2/4) / ~ 4,43 g/cm3 (Grade 5) insoluble in water n.a. n.a. n.a. n.a. 10. stability and reactivity 10.1 conditions to avoid: n.a. 10.3 hazardous decomposition...
Open the catalog to page 4
13. disposal considerations suggestion: Contact waste processors for recycling information european waste catalogue: 12 01 04 non-ferrous metal dust and particles n.a. n.a. titanium grade 2, titanium grade 4, titanium grade 5 n.a. n.a. none 14.3 correct identification of goods: 14.5 ocean harmful substances: 14.6 other relevant informtation: 15. regulatory information subject to classification: This product is no subject to declaration according to EC rules 16. other information This safety data sheet is based on our present knowledge. However, this shall not constitute aguarantee for any specific...
Open the catalog to page 5All Whitepeaks Dental Solutions GmbH catalogs and technical brochures
CopraSintec K4 Pages
CopraPeek4 Pages
CopraPlex5 Pages
- Dental material
- Dental restoration material
- Resin dental material
- Dental prosthesis dental material
- Dental crown material
- Biocompatible dental material
- Dental bridge material
- Dental laboratory dental material
- Ceramic dental material
- Liquid dental material
- Translucent dental material
- Opaque dental material
- Orthodontic material
- Dental CAD/CAM material
- Milling dental material
- White dental material
- Temporary dental material
- Transparent dental material
- ZrO2 dental material
- Acrylic dental material