CopraPlex
CopraPlex
The document identifies the substance as polymethylmethacrylate, used in PMMA blanks for dental casting techniques. The producer is Whitepeaks Dental Solutions GmbH & Co. KG, located in Essen, Germany.
The primary ingredient is polymethylmethacrylate.
There are no specific hazards designated for humans or the environment, and no harmful effects are noted upon abuse.
General first aid measures include consulting a physician after inhalation or swallowing, and rinsing eyes if swarf enters them.
Suitable extinguishing media include water spray, foam, powder, and carbonic acid gas. Full water jets are not suitable. Special protective equipment includes independent respirators.
No specific personal or environmental precautions are necessary. Mechanical absorption and disposal according to regulations are recommended.
Extraction measures are required during thermal processing. Storage should be in dry conditions, protected from heat.
Use dust extractor devices at workstations. Protective equipment includes respirators, gloves, glasses, and clothing.
The substance is solid, odorless, with a flash point of <250°C and a softening temperature of 110°C. It is insoluble in water.
No hazardous decomposition products under intended use, but irritating fumes may arise during thermal decomposition.
The product has not been toxicologically tested but is not expected to have harmful effects when used as specified.
The product is not ecotoxic and has low water solubility, making bioavailability unlikely.
Disposal should follow official rules and directives, classified as plastic waste.
The product is not classified under any transport regulations.
The product is not subject to classification or declaration according to EC rules.
The safety data sheet is based on current knowledge and does not guarantee specific product features or establish a legally valid contractual relationship.
Catalog excerpts
safety data sheet according to 91/155/EEC printing date: 03.09.2015 review: issued: 08.08.2014 1.2 application / preparation: PMMA blanks for the dental casting technique 1.3 producer / supplier: Whitepeaks Dental Solutions GmbH& Co. KG 1.4 toxication helpdesk: Giftnotrufzentrale Berlin: 3.1 hazard designation for human an environment: n.a. 3.2 hazardous / non hazardous preparation: n.a. 3.3 harmful effects to health and evironment on n.a. 3.4 other hazards based on material: none Whitepeaks Dental Solutions GmbH & Co. KG Langeheide. 9 45239 Essen mail: [email protected] web: www.whitepeaks-dental.de
Open the catalog to page 1
4.1 general information: 4.2 after inhalation: 4.3 after skin contact: 4.4 after eye contact: 4.5 after swallowing: 4.6 information for physician: 5. fire-fighting measures 5.1 suitable extinguishing media: 5.2 not suitable extinguishing media: 5.3 hazardous combustion products: 5.4 special protection equipment: no special measures are required consult a physician n.a. if swarf get into your eyes, rinse open eye for several minutes under running water. If symptoms persist consult a physician in case of discomfort consult a physician n.a. water spray, foam, powder, carbonic acid gas full water...
Open the catalog to page 2
8. exposure controls/personal protection 8.1 exposure limits: 8.2 limitation and monitoring to exposure 8.2.1 limitation and monitoring to exposure at work station: 8.2.1.1 respiratory protection: 8.2.1.2. hand protection 8.2.1.3. eye protection: 8.2.1.4. skin protection: 8.2.2. limitation and monitoring to environmental exposure: n.a. n.a. use suitable dust extractor device at workstation. Do not eat, drink or smoke while you are working. Keep away from food and drinks. use respirator if there is not sufficient extractor device wear protective gloves wear protective glasses use protective clothes n.a....
Open the catalog to page 3
10.3 hazardous decomposition products: None according to intended application. During thermal composition irritating and flammable fumes arise which irritate eyes and respiratory system. The fumes exist prevalent of: methylmethacrylate 11. toxicological information this product was not toxicological tested. When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us 12.1 ecotoxicity: 12.2 mobility: 12.3 persistence / degradability: 12.4. bioaccumulation potential: 12.5. other adverse effects: none n.a. low...
Open the catalog to page 4
regulatory information subject to classification: no subject to declaration according to EC rule other information This safety data sheet is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. We can not a guarantee or give a warranty for the accuracy, dependability and completeness of this information, explicitly or implicitly. We call upon any person getting this information to urgently check and verify the adequacy and completeness for her or his special application....
Open the catalog to page 5All Whitepeaks Dental Solutions GmbH catalogs and technical brochures
CopraSintec K4 Pages
Copra Ti5 Pages
CopraPeek4 Pages
- Dental material
- Dental restoration material
- Resin dental material
- Dental prosthesis dental material
- Dental crown material
- Biocompatible dental material
- Dental bridge material
- Dental laboratory dental material
- Ceramic dental material
- Liquid dental material
- Translucent dental material
- Opaque dental material
- Dental CAD/CAM material
- Orthodontic material
- Milling dental material
- White dental material
- Temporary dental material
- Transparent dental material
- ZrO2 dental material
- Acrylic dental material