Bravo B2-CIC 100% digital CIC • Programmable (SP3 or Compass) • Wide Dynamic Range Compression The Bravo Digital Signal Processor (DSP) works with 20-bit representation of the signal and a sampling rate of 32 kHz. Bravo B2-CIC is a superbly engineered hearing aid in the renowned Widex tradition. Bravo B2-CIC offers you: • 2 channel DSP (Digital Signal Processing). • Wide Dynamic Range Compression to maximize speech intelligibility and listening comfort. • Feedback Risk Management for reduction of acoustic feedback. • Variable crossover frequency. B2-CIC is fine tuned with three parameters: LF = Low frequency gain HF = High frequency gain MPO = Maximum power output Recommended for: • Mild to moderately severe hearing losses. • All configurations of hearing loss including conductive, sloping, flat and reverse slope losses. • People wanting a fully automatic aid and discretion. Suggested fitting range Proper fitting of this CIC hearing aid requires the taking of a deep-canal impression. Hearing Healthcare Professionals should not attempt this type of fitting unless they have the necessary skills to take this type of impression safely. For further information, please consult the Senso CIC Impression Manual. • Special digital fitting philosophy based on keyed in audiometric values. • Long battery life of approximately 100 hours. • Low battery beep-tone indicator. • Minimal audible internal noise due to special processing.

Bravo B2-CIC Wide Dynamic Range Compression (WDRC) CIC vent Bravo B2-CIC has a special CIC vent, which opens between the residual volume and the cavity of the shell, without a connection through the faceplate. The dimensions of the vent are tuned for best relief of occlusion and minimum influence on the sound quality. The vent does not take up space in the faceplate and it does not feed the sound back to the microphone. Consequently it can be used in smaller instruments than is the case with normal vents, and it produces less feedback The WDRC system used in the Bravo B2 models is an extension...