Bravo B32 100% digital, high power BTE • Programmable (SP3 or Compass) • Wide Dynamic Range Compression • Digital Volume Control The Bravo Digital Signal Processor (DSP) works with 20bit representation of the signal and a sampling rate of 32 kHz. Bravo B32 is a superbly engineered hearing aid in the renowned Widex tradition. Bravo B32 features include: • 2 channel DSP (Digital Signal Processing). • Wide Dynamic Range Compression to maximise speech intelligibility and listening comfort. • Feedback Risk Management for reduction of acoustic feedback. • Variable crossover frequency. B32 is fine tuned with three parameters: LF = Low frequency gain HF = High frequency gain MPO = Maximum power output • Special digital fitting philosophy based on keyed-in audiometric values. • Digital Volume Control (± 6 dB range) with beep-tone adjustment indicator. • M, MT, and T program switch. The telecoil frequency response is equalised, making it identical to that of the microphone. • Moderately severe to profound hearing losses. • Long battery life of approximately 500 hours. • All configurations of hearing loss including conductive, sloping, flat and reverse slope hearing losses. • Minimal audible internal noise due to special processing. Suggested fitting range • Low battery beep-tone indicator. • Direct audio input. • Tamper resistant battery drawer. • Available in new Widex colours. • CROS and BiCROS adaptor

Bravo B32 Wide Dynamic Range Compression (WDRC) Programming Bravo B32 can be programmed using the SP3 portable programmer or via a PC using NOAH/ Compass software. Please refer to the Bravo series programming manual. Feedback Management The WDRC system used in the Bravo B32 models is an extension to the HLC system where the compression kneepoints have been lowered in both channels. This means that the insertion gain on models with WDRC is higher for soft inputs compared to models with HLC. The result is an increase in the user’s range of acoustical awareness because soft sounds become audible....