*mymedicalexpo

IN-19

Product catalog summary

Introduction
Inteo IN-19 is a digital power behind-the-ear (BTE) hearing aid featuring Integrated Signal Processing™ and Dynamic Integrator™. It is the first of its kind to introduce these technologies, offering advanced sound processing capabilities.

Key Features

Dynamic Integrator™: Integrates and stores knowledge for improved hearing aid performance.
High Definition Sound Analysis: Includes Sound Diary, Speech and Noise Tracer, S/N Ratio Tracer, Spatial Feedback Tracer, and Spatial Sound Tracer.
High Definition Sound Processing: Features High Definition Locator, Multi-directional Active Feedback Cancelling, Audibility Extender, Speech Enhancer, and Enhanced Dynamic Range Compression.
High Definition System Optimiser: Includes Battery Monitor, EcoTech II, Multi-point Microphone Matching, and DAI Auto-detect.

Technical Specifications

Technology: Sampling frequency of 2 MHz, 1 million gates complexity, and 0.13µ IC technology.
Output and Gain: Detailed output levels and gain measurements are provided for various frequencies, adhering to IEC and ANSI standards.
Frequency Range: 100 Hz to 6950 Hz, with harmonic distortion levels specified at different frequencies.
Battery Life: Utilizes Type 13 Zn-Air batteries with a life expectancy of over 285 hours.

Performance Metrics

Output levels and gain are measured across different frequencies, ensuring compliance with IEC 60118-0 and IEC 60118-7 standards.
Harmonic distortion is minimal, with values provided for 500 Hz, 800 Hz, and 1600 Hz.
Equivalent input noise and battery drain are specified, highlighting the device's efficiency.

Catalog excerpts

Digital Power BTE with Integrated signal processing™ and Dynamic Integrator™ Inteo IN-19 with unique features including: Dynamic Integrator™ • Integration and storage of knowledge High definition sound analysis • Sound Diary • Speech and noise tracer • S/N ratio tracer • Spatial feedback tracer • Spatial sound tracer High definition sound processing • High definition Locator Dynamic Integrator™ Inteo is the first hearing aid on the market to introduce Integrated signal processing™. • Multi-directional active feedback cancelling • Audibility Extender • Speech Enhancer • Enhanced Dynamic Range Compression High definition system optimiser • Battery monitor • EcoTech II • Multi-point microphone matching • DAI auto-detect Technology Sampling frequency Complexity (Gates)

Open the catalog to page 1

Inteo IN-19 Maximum output - Ear simulator Maximum output - 2cc coupler Technical data Typical data obtained through standard pure tone measurements. Hearing aid set to linear test mode. IEC 60118-0 Acoustic output (Input 60 dB SPL) Max. gain (special measurement) Telecoil output (Input 10 mA/m) Equivalent input noise Battery drain (stand by) Battery drain Frequency range Harmonic distortion (Input 70 dB SPL) Battery life / hours (Type 13 Zn-Air, 270 mAh) IRIL, IEC 60118-13 (3 / 2 V/m)

Open the catalog to page 2