Wiegand Material and maintenance information
16Pages

Material and maintenance information Important information about the composition, handling, care and cleaning of Wiegand products.

Your competent partner As your professional partner for medication distribution systems, furnishing projects, trolleys and logistic solutions, Wiegand AG is always on hand to help. Since 1975, Wiegand has been developing aids to support logistics in hospitals, homes for the elderly, care centres and outpatient care in collaboration with experts from the healthcare field. Everything from one supplier Wiegand AG offers you a complete service – from requirement analysis and advice up to project planning and implementation. Many years of experience and a deep understanding of working processes...

Important information All information in this document has been checked by Wiegand AG or our partners and verified with appropriate product tests. All the instructions contained in the information must be followed in order to use the products correctly. No guarantee claims can be asserted for damage to our products caused by improper handling or poor maintenance. If you have any additional questions on the use, maintenance or handling of Wiegand products, Wiegand’s expert team will be happy to help you, and can be contacted by phone at +41 44 872 74 74 or by e-mail at...

Wiegand MediDispenser and trays The medication distribution system products are made of PS or ABS plastic. They are manufactured in Switzerland, and meet the highest demands of quality and durability. PS (polystyrol) or ABS (acrylnitril butadien styrol copolymere) The material becomes brittle if stored improperly, subjected to UV radiation or to temperatures under -30°C and over +45°C. It is absolutely essential to store the products in closed, dry cabinets Material and maintenance information The product can be cleaned at a maximum temperature of +70°C for a maximum of 15 minutes. If lye,...

Material and maintenance information PET becomes distorted by heat and the flanged rim could open as a result (hydrolysis). Temperature tolerance up to +40°C, not heat-resistant. The use of acids (acetone), alkalis, aldehydes, esters, hydrocarbons and oxidants causes damage to the product. The product is recyclable and contains no hazardous substances. Energy recycling can be carried out without any problem. Material and maintenance information The material becomes distorted by heat and the flanged rim could open as a result (hydrolysis). Temperature tolerance up to +40°C, not...

Inlay dishes Material and maintenance information PS (polystyrol) The materials become brittle at temperatures of under -40oC and over +60oC. The product can be cleaned at a maximum temperature of +70oC for a maximum of 15 minutes. We recommend the dish washer basket with inset for cleaning (item no.910.66.1) If lye, disinfectants and detergents containing alcohol, or acids are used, the material becomes brittle. The product is recyclable and contains no hazardous substances. Energy recycling can be carried out without any problem. Single-use inlay dishes Material and maintenance...

Material and maintenance information PP (polypropylene) Can be cleaned in the dishwasher (max. 30 minutes at 80oC). We recommend the dish washer basket with inset for cleaning (item no. 910.71.1) Standard detergents and disinfectants can be used for cleaning. The product is recyclable and contains no hazardous substances. Energy recycling can be carried out without any problem. CE certificate CE 0543, medical product Single-use MediCup light Material and maintenance information Only suitable for single use. The product is recyclable and contains no hazardous substances. Energy recycling can...

Material and maintenance information If stored improperly or at temperatures of under -0oC and over +60oC, the material becomes brittle or distorted. Standard soap detergents can be used for cleaning. The use of acids (acetone), alkalis, aldehydes, esters, hydrocarbons and oxidants causes damage to the product. The product is recyclable and contains no hazardous substances. Energy recycling can be carried out without any problem. BlisterBox Duro Material and maintenance information Casing: ABS (acrylnitril butadien styrol copolymere) Lid: PC (polycarbonate) If stored improperly or at...

PillCrusher Professional Aluminium Steel Material and maintenance information The product should be cleaned with a moist, lint-free cloth. Do not clean under running water and do not use any disinfectant sprays. Dispose of correctly, according to professional guidelines. PillCrusher pouches PE (low-density polyethylene resin) Material and maintenance information With diagonal corners. For single use. The product is recyclable and contains no hazardous substances. Energy recycling can be carried out without any problem.

Plastic parts: PA (polyamide) Mortar: Stainless steel Material and maintenance information Standard disinfectants can be used for cleaning. No aggressive detergents (such as acetone) should be used. The product is not suitable for sterilisation. The product is recyclable and contains no hazardous substances. Energy recycling can be carried out without any problem. Material Material and maintenance information Highly breakproof, resistant to machine washing up to 100°C. Standard detergents and disinfectants can be used for cleaning. Do not use any aggressive detergents such as acetone. The...

Material and maintenance information ABS (acrylnitril butadien styrol copolymere) - grey PC (polycarbonate) - transparent The material becomes brittle if stored improperly, subjected to UV radiation or to temperatures of under -30oC and over +45oC. The product can be cleaned. If oxidants, hydrocarbons, ketones, esters, aldehydes or acetones are used, damage occurs to the product. The product is not suitable for sterilisation. The product is recyclable and contains no hazardous substances. Energy recycling can be carried out without any problem. Holder for blister bags and stock labels...