Control Unit AWS-analogue
Control Unit AWS-analogue
- The control unit is specifically designed to enhance the performance of WITT MFC gas mixers.
- Only one analogue control unit (AWE) is needed for each 2-gas MFC mixer.
- It includes an integrated power supply, eliminating the need for an external mains adapter.
- The display of actual values is freely scalable, allowing for easy adaptation to different measuring ranges.
- Set points can be selected with high precision using a potentiometer.
- Remote transmission of set points and actual values is possible for integration into external control systems.
- Flame adjustment is convenient with individual or proportional MFC settings in Master-Slave-Mode.
- 19" cartridge housings facilitate easy installation, with desktop housings available for up to 4 cartridges.
- Type: Analogue control unit with 2 channels.
- Temperature Range: 0 °C to 50 °C (30 °F to 120 °F).
- Actual Value Display: 0-5 V, shown on a 3.1/2 digit LED-display in Nl/min, scfm, or %.
- Set Point Adjustment: 0-5 V, adjustable by potentiometer or external control system.
- Interfaces: Sub-D-male 9 pins for analogue actual values and set points.
- Weight: 1.2 kg.
- Dimensions: 19" cartridge height: 3 U, width 21 HP, depth 180 mm (7 inch) without connections; optional factory installation in desktop housing for 1-4 cartridges.
- Voltage: 230 V / 50-60 Hz.
- Power Consumption: Maximum 300 mA.
- The company is certified according to ISO 9001.
- The control unit is CE-marked for EMC 2004/108/EC and Low Voltage Directive 2006/95/EC.
Catalog excerpts
THERMAL PROCESSING control unit AWS-analogue Analogue Control Unit to go with WITT MFC Gas mixers Benefits ●● analogue Control Unit designed to optimise the use and properties of WITT MFC gas mixing systems ●● only 1 AWE required for each 2-gas MFC mixer power supply – no external mains adapter for the MFC’s required of actual value freely scalable - simple adaption of different measuring ranges point selection by high precision potentiometer transmission of set point and actual values for the integration into external control systems flame adjustment by individual or proportional MFC setting (Master-Slave-Mode) cartridge housings for easy installation housings for up to 4 cartridges available analogue control unit with 2 channels Actual value 0-5 V, displayed on a 3.1/2 digit LED-display in Nl/min, scfm or % 0-5 V, adjustable by potentiometer or by external control system Sub-D-male 9 pins; for analogue actual values and set points Weight MD7 - B01/I4 subject to change 19“ cartridge height: 3 U, width 21 HP, depth 180 mm (7 inch) without connections; optional factory installation in desktop housing: - 1-2 cartridges in 1/2-19“ housing - 3-4 cartridges in full 19“ housing Power consumption max. 300 mA Approvals Company certified according to ISO 9001 CE-marked for: - EMC 2004/108/EC - Low Voltage Directive 2006/95/EC WITT-Gasetechnik GmbH & Co KG, Salinger Feld 4-8, D-58454
Open the catalog to page 1All WITT catalogs and technical brochures
GAS ANALYSER MFA 90001 Page
GAS ANALYSER OXYBABY® MED3 Pages
Production d’air synthétique5 Pages
WITT Mélangeurs de gaz16 Pages
Catalogue 201678 Pages
HYDROBABY and MFA H202 Pages
OXYBABY Med gas analyser2 Pages
MGN2 Pages
MED-MG synthetic air mixer2 Pages
Witt Catalogue 201372 Pages
OXYBABY® 6.0 - data sheets2 Pages
Archived catalogs
leak-master® Easy1 Page
- Automatic balance
- Medical gas pressure reducer
- Gas outlet
- Medical device testing system
- Control analyser
- Medical pressure regulator
- Oxygen pressure reducer
- O2 analyzer
- Flow testing system
- Manifold
- Adjustable-flow pressure regulator
- Pressure testing system
- Oxygen gas mixer
- Continuous testing system
- Medical gas manifold
- Medical gas blender
- Laboratory pressure regulator
- High-pressure pressure regulator
- Moisture balance
- Digital moisture balance