Accessories for Fuego SCS Serie & Gasprofi 1 micro Serie
2Pages

{{requestButtons}}

Catalog excerpts

Accessories for Fuego SCS Serie & Gasprofi 1 micro Serie - 1

Inoculation loops, wire Ø 0.6 mm Windshield made of stainless steel, for a stable flame under conditions of strong air flow Art.-No. 8.000.600 Spray protector for more safety when handling with pathogenic material Art.-No. 6.000.200 Special stainless steel Ø 1 mm: Art.-No. 6.000.371 Ø 3 mm: Art.-No. 6.000.373 Ø 5 mm: Art.-No. 6.000.375 Inoculation loop holder made of stainless steel, with sleeve nut, for inoculation loops with wire Ø 0.6 - 1 mm Length 245 mm: Art.-No. 6.000.360 Length 215 mm: Art.-No. 6.000.365 Platinum / Iridium Ø 1 mm: Art.-No. 6.000.381 Ø 3 mm: Art.-No. 6.000.383 Ø 5 mm: Art.-No. 6.000.385 Tray, mobile made of stainless steel, 5 places Art.-No. 6.000.320 (1) Foot pedal made of stainless steel, cable Art.-No. 6.000.402 length 3.0 m (2) Foot pedal Mini made of plastic, cable Art.-No. 6.000.403 length 3.0 m (3) Benchtop switch made of stainless steel, cable Art.-No. 6.000.405 length 0.4 m Foot pedal radio set RF Stick cable-free foot pedal operation, simply connect the RF-Stick and control the gas burner with wireless radio technology (available in EU countries only) External IR - motion sensor touch-free flame activation, made of stainless steel, cable length 0.4 m Art.-No. 6.000.406 for all Fuego SCS and Gasprofi 1 SCS micro (as of Serial-No. 05...) Art.-No. 8.000.404-RF Thermocouple type K (only Fuego SCS & Fuego SCS pro, as of Serial-No. 12Zxxxxx) (1) Immersion sensor Ø 3 mm with handle, sensor length 130 mm, helix connection cable Art.-No. 8.200.240 (2) Immersion sensor Ø 1.5 mm, sensor length 150 mm, bendable, cable length 2 m Art.-No. 8.200.241 (3) Air sensor, PTFE insulated, cable length 1 m Art.-No. 8.200.242 Measuring adapter for thermocouples, type K, temperature range from +35°C to +350°C (only Fuego SCS & Fuego SCS pro, as of Serial-No. 12Zxxxxx) Art.-No. 8.200.230 Tray for right, left or rear side for Fuego SCS - Series Art.-No. 8.000.340 for Gasprofi 1 SCS micro Art.-No. 6.000.341 (1) Ecoloop manual carrousel for flame sterilizing of up to 4 inoculation loops, to screw on (Fuego SCS - Series only) Art.-No. 8.000.350 (2) Spray protector for Ecoloop / Autoloop for more safety when handling pathogenic material Art.-No. 6.000.210 Burner head made of stainless steel, double lengh for better heating of Erlenmeyer flasks, decomposable, dishwasher-proof and autoclavable Art.-No.

Open the catalog to page 1
Accessories for Fuego SCS Serie & Gasprofi 1 micro Serie - 2

Safety adapter with integrated pressure regulator for gas cartridges CV 360 Art.-No. 8.000.700 for gas cartridges Express 444 Art.-No. 6.000.750 Safety adapter CP250 with integrated pressure regulator and DVGW-tubing (0.5 m) for gas cartridges CP 250 Art.-No. 6.000.820 Safety adapter C 206 with integrated pressure regulator, gas leak protection and DVGW-tubing (0.5 m) for gas cartridges C 206 Art.-No. 6.000.800 Safety adapter CG 1750 with integrated pressure regulator, DVGW-tubing (0.5 m) and stainless steel stand for gas cartridges with 7/16“ UNEFthread, e.g. CG 1750 Art.-No. 6.000.810...

Open the catalog to page 2

All WLD-TEC catalogs and technical brochures

  1. SteriMax

    4 Pages

  2. Flame 110

    4 Pages

  3. Autoloop Pro

    5 Pages

  4. Flame 100

    4 Pages

  5. Fuego

    6 Pages