Ventilation unit with heat and moisture recovery FLAT www.xvent.cz

Heat and moisture recovery unit Heat and moisture recovery unit suitable for apartments and smaller family houses universal installation location heat and moisture recovery exchanger possibility to connect external preheater easy installation The connection sockets are at an angle of 45 ° and thus allow rigid or flexible ducting without ...The Xflat unit is focused on maximum utility crossing the contour of the unit. value for use in apartment buildings. Thanks to its dimensions and MultiPlacing design, the unit can be installed in 6 different positions and in really small installation spaces....

Heat and moisture recovery unit Heat and moisture recovery unit ...description of the unit and its feature... Central unit Xflat with heat and humidity recovery. With its air output of 150 m3/h, it is very suitable for ventilation of apartments with a living area of up to 70 m2. The design of the unit allows it to be installed in any position on the wall or ceiling. Thanks to its minimum height, it can be mounted on ceilings of normal height without interfering. During its development, great attention was paid to reliable condensate drainage in any position. The equipment of the Xflat unit is...

Heat and moisture recovery unit Heat and moisture recovery unit Frequently asked questions / Answers Decentral vs. central ventilation... Decentral ventilation is mechanical ventilation for one room only. Central ventilation is mechanical ventilation of more rooms by once device. Central ventilation is provided by units with bigger dimensions than units for decentral ventilation, since these has to supply higher air volume. Units for central ventilations are usually located in the technical room where they are not annoying the users by high noise level and they are not blocking any space. Central...

Heat and moisture recovery unit Heat and moisture recovery unit What means „mul tiplacing system“ Installation of the unit is simplified, that handyman can install it by him self. Installation does not require any specialist. Because the unit is very light, installation is possible in one. The mains connection cable is already removed from the unit. Retrofitting and connection of accessories is carried out in the control box. Xflat is a unique unit in that it can be installed in almost any position. It is equipped with three condensate outlets as standard. After installation, the end of the plastic...

Heat and moisture recovery unit Control description Heat and moisture recovery unit Control panel description Indicator of air flow setting By pressing the button, you come to the manual mode – ventilation is manually controlled by user, out-puts from the AQS sensors are ignored. By pushing the button once again you can active automatic mode – ventilation on demand based on AQS sensors (if connected) BOOST mode - 3s holding of button FILTERS CLOGGING Indication of clogged filter is activated by timer, roughly after 6 month operations (only if the units ventilate). Indication is signaled by red...

Heat and moisture recovery unit Technical data Unit XFLAT electric (max.1kW external preheater) electric (max.1kW external preheater) Type of recovery exchanger Xflat-150-heat and moisture recovery efficiency Unit equipment * Type of recovery exchanger Technical parameters VENTILATION AND HEATING UNIT WITH HEAT AND HUMIDITY RECOVERY Type Heat and moisture recovery unit Nominal airflow (external static pressure 100Pa) Noise level** Nominal power input Energy efficiency class (SEC) cold climate A+ ; middle climate A ; warm climate A cold climate A+ ; middle climate A ; warm climate B AirFlow -...

Heat and moisture recovery unit Packaging and dimensions Weight Type XFLAT UNIT Package size (width Pieces on a pallet x length x height) (max.stackability) Package includes: • Unit Xflat Quick manual Safety instruction Basic dimensions Heat and moisture recovery unit Accessories Fil ters Xroom M5 - Coarse 90% ISO 16890 CO 2 room sensor CO2 sensor Rh room sensor RH sensor NL-ECO-RH CO2 room sensor - after switching the unit to automatic mode, the air flow is regulated based on the CO2 concentration in the room. RH room sensor - after switching the unit to automatic mode, the air flow is regulated...

more information Xvent s.r.o. Poděbradská 289, 53009 Pardubice Czech Republic