Orthodontics
14Pages

{{requestButtons}}

Catalog excerpts

Orthodontics - 1

Locking Tweezers / Chin Cap 196 Impression Tray 197

Open the catalog to page 1
Orthodontics - 2

At initial stage, it provides speedy treatment, and middle and late stage, it provides positive torque control. Comparing to Composite and Alumina GgBEBrca Central Base Outside Base Initial Stage Middle and Late Stage Approach points for debonding instrument on mesial / distal corners of base provide smooth and safe debonding without breakage of bracket. Smooth Debonding Similar to natural teeth.

Open the catalog to page 2
Orthodontics - 3

Orthodontics Zirconia Ceramic Bracket COBY 0086 -Wire Selection for .018" slot. [.018" x .025" Slots] Low friction Round wire .012" / .014" / .016" / .018" Rect. wire .016" x .016" Torque control Rect. wire .016" x .022" .017" x .025" .018" x .025" * Only UL3 : With the hook. -Straight .022" slot- Fine Traditional and Classical Design. Fine Tips and Supple Curved Handle. -Wire Selection for .022" slot.- [.022" x .028" Slots] Torque control Rect. wire .017" x .025" .018" x .025" .019" x .025" .021" x .025" .022" x .028" * Only UL3 : With the hook. -Standard .018" slot-Wire Selection for...

Open the catalog to page 3
Orthodontics - 4

*Cut and hold distal end of arch wire. *Cut excess ligature wire. *Cemented carbide inserts provide high performance and long life of the tips. *Hard material inserts ensure cutting of ligature wire and elastic. *Joint part has changed from 3pc(YS) to 2pc(EVER Fine). This change can reduce the problem of rust in joint part. *Joint part has changed from 3pc(YS) to 2pc(EVER Fine). This change can reduce the problem of rust in joint part. 615 with Hard Material 605 with Hard Material *With long handle and small head to ensure easy access in hard to reach areas. *Cut up to ●Round wire...

Open the catalog to page 4
Orthodontics - 5

Orthodontic Pliers -Utility Pliers- Traditional and classical design fascinate artistic mind. -Bending Pliers- Supple curved handle narrow box joint fascinate new generations. *Texture of tip is 0.25mm(.010"), can hold arch wire firmly. *Texture of tip is 0.25mm(.010"), can hold arch wire firmly. *Insert, remove the main wire. *Maximum wire capacity .022"x.028" *Multi purposes for tying ligature etc. *Hold arch wire, apply torq, offsetbend, inset-bend. -Bending Pliers- *Maximum wire capacity .036” *Quad Helix, lingual arch, activate of main wire. *Maximum wire capacity .036” *Bend retainer...

Open the catalog to page 5
Orthodontics - 6

Orthodontics Orthodontic Pliers ‘Traditional and classical design fascinate artistic mind. *Matte surface can avoid reflection of pliers under bright light. -Bending Pliers- -Banding Pliers- 419 Nance Closing Loop No.27419 ‘Maximum wire capacity .022” *With using each step (3.5mm, 4.5mm, 5.5mm, 6.5mm), arrange the loop wire, apply torque on MEAW loop. I5IB3 453 Kim T/C (with Cutter) No.27453 ‘Maximum wire capacity .016"x.022” 'Cut up to .020” ‘Bend MEAW loop. -Bending Pliers- 424 Light Wire T/C (with Cutter) No.27424 I3H 452 Light Wire T/C (with Cutter) 'Maximum wire capacity .020” 'Cut up...

Open the catalog to page 6
Orthodontics - 7

Orthodontic Pliers -Aligner Pliers*With fine tips to ensure to insert into lingual or narrow part,crowded teeth. *With long handle to ensure to insert into lingual or narrow part,crowded teeth. *Matte surface can avoid reflection of pliers under bright light. *Supple curved handle fits female dentists.

Open the catalog to page 7
Orthodontics - 8

Convertible Cap Removing Pliers C€ 1) Insert the blade edge parallel to cap from mesial side of buccal tube slot. [Sectional Drawing] Buccal Tube 2) By gripping the handle, Move the blade to distal side and remove the cap easily. [Sectional Drawing] Buccal Tube *Please remove the fallen cap from a mouth.

Open the catalog to page 8
Orthodontics - 9

Tying Pliers Module Pliers *Tie ligature wire on the bracket. *Put module on the bracket. *With ultra thin tips, easy to insert into the mouth. *Used for applying both long and short type ligature wire. Ligature Director *Tuck excess ligature wire. *With groove, module can move easily and give power on bracket fairly. *Tie ligature wire on the bracket with wing shape. *With one instrument, two function-tucking and tying. *Tuck excess ligature wire. Arch Wire Director No.27709

Open the catalog to page 9
Orthodontics - 10

Bracket Tweezer Bracket Tweezers *Hold firmly the bracket by groove at the tips. *Before applying band, used for placement of separating elastic. *At the end of the handle with measure (3.5mm, 4.0mm, 4.5mm, 5.0mm) helps bracket height and angulation. Surplus Cement Remover *Remove surplus bonding material smoothly. Band Seater Bracket Tweezer *Set band by patient's own occlusal force. *Tip can be replaced. BracketPliers Tying Tweezer YS-703 Band Pusher *Insert band.

Open the catalog to page 10
Orthodontics - 11

Typodont Articulator Model Measuring Device Contents Main body, Chart (25 sheets) *Wax form does not include. -Example of Practicing with the Typodont Practice Model- *This measuring device is for the purpose of measuring following length/ Width below on a tooth model, constituting T shape ruler and (vertical, horizontal) indicator needle. The indicator needle designed to slide on its vertical surface. *This measuring device is designed to measure following (1),(2),(3). For the measurement of (4) please use separately sold Orthodontic Caliper as the direction mentioned below. 1) A t t a c h...

Open the catalog to page 11
Orthodontics - 12

Tension Gauge Boone Gauge *Check position of bracket on tooth. *Measure the force of coil spring and elastic. *Measure bracket height 4.5mm, 4.0mm and 3.5mm. Handy Torch *Sharp flame is suitable for delicate work. *Gas is empty at the time of delivery. Red needle moved pushing by blac k needle. Red needle remains to show the tension of coil spring or elastic. Nozzle Nozzle cover Plunger (OFF-ON) Orthodontic Calipers Specifications *Weight / 245g (with the screen board) *Gas Volume / 15g *Combustion Time / 80min. *Flame Temperature / 1300°C (blue flame) *The head is given 70° angle to avoid...

Open the catalog to page 12
Orthodontics - 13

Orthodontics Scraper Color Tray -Premium-*Aluminium *Color coded for easy identification. *By an edge with height, the impression of a frenum or buccal mucous membrane can be taken firmly. *Easily bendable for a custom fit. *Impression materials stick to alminium well because of features of alminium itself,also they are difficult to be removed when in fitting. Lower No.22868Tracing Plate Maxillary TractionNo.22869 Not YS-40No.22940 SMA SKB ARB (AB diff: FMA FMIA IMPA L-l to mb4J 0-1 to L-l listeria 0-1 to SR Maad p to 3N Occ p to SR Qoma. jngle Tracing Plato

Open the catalog to page 13

All YDM catalogs and technical brochures

  1. Diagnosis

    7 Pages