Chlorine 3017M DPD CHLORINE ANALYZER FOR AQUACULTURE & AQUATIC HABITATS Continuously measure chlorine in your aquatic application with YSI’s 3017M DPD chlorine analyzer. Prevent unnecessary stress on your aquatic life caused by excessive chlorine levels. With a low limit of detection, the 3017M is ideal for chlorine measurements in aquaculture and aquatic habitats. The analyzer features two configurable relays to alert you to harmful spikes in chlorine. Accurate and reliable – Measures free or total chlorine using the DPD colorimetric method. This highly accurate method of analysis provides reliable data for process optimization and control. Low maintenance – Flow Injection Analysis simplifies maintenance and saves you time. Simplified tubing and low reagent use reduce the frequency of instrument maintenance. For more information visit: Factory calibrated – Eliminates the need for regular calibration. Process Control – Two configurable relays that you can connect to a PLC to automate and control chemical

DPD CHLORINE ANALYZER SPECIFICATIONS Measurement Method Measurement Range 0-5 mg/L free or total chlorine, reagent dependent Measurement Interval Factory calibrated, 1-point if required General Display IP66 (with door latched) Instrument Dimensions 4 mounting struts bolted to back of unit Instrument Shipping Weight Regulatory Compliance US EPA regulations 40 CFR 141.74 and 40 CFR 136.3; Standard method 4500-CL-G; US EPA method 334.0; ISO method 7393-2 English, French, German, Italian, Spanish Sample Requirements Sample Flow Rate to Sample Inlet Device 50 to 1,000 mL/min when using Sample Inlet...