Catalog excerpts
User Manual DENTAL DIODE LASER
Open the catalog to page 1Dental diode lasers deliver clear benefits over conventional methods of treatment with mostly scar-free wound healing and improved germ reduction. For patients, the use of lasers means less post-operative pain and therefore less need for medication. Not only that, but your practice benefits too, because satisfied patients are the best way to ensure success. The Newest BeauLaser Lee is the first 970nm dental diode laser machine.
Open the catalog to page 2Frenectomy • Interventions involving low levels of pain and bleeding • Hemostasis • No sutures and less scars, accelerated wound healing • Often no more than surface anesthesia required, less post-operative discomfort Gingivoplasty • Easy visualization of clean contours • Interventions wih low bleeding level • Less post-operative problems Tissue management • Retraction cords no longer required • Clearly defined ‚clean’ and ‚dry’ preparation edges • Avoiding injuries and bleeding of the tissue • Optimal technique for taking dental impression
Open the catalog to page 3Fibroma • Removal of the mucosal lesion with no contact between fiber and tissue • Direct coagulation without sutures • Non-irritated wound area with no secondary bleeding • Reduced scar formation Whitening • Teeth whitening, Tetracycline teeth, fluorosis teeth, hereditary pigmented teeth, tobacco stained teeth, tea stained teeth, coffee teeth, yellow teeth, black teeth Technical Data Wavelength and operating performance Laser operating mode Continuous Wave, pulse Mode,single Mode Duty cycle 8kg (incl. handpiece and shell)
Open the catalog to page 4All patients coming to a dental office or clinic and needing a treatment that can be done or supported by the use of a diode laser can be treated with the BeauLaser Lee. For indications for use refer to chapter "Indications and contraindications Applications Implantology Treatment at and around the implant, for example uncovering the implant, decontamination, and making clear preparation margins for impressions and scans. Endodontics After preparing and rinsing the root canal, the laser is used in addition to conventional treatment. The laser efectively reduces germs and bacteria in areas a...
Open the catalog to page 6All persons present in the room e.g.patient, dentist, assistent must always wear the appropriate laser protective goggles delivered along with the BeauLaser Lee Compared to conventional dental surgery, treatment with the BeauLaser Lee offers the following advantages: less invasive, minimum cell destruction, less bleeding, better coagulation, and negligible post operative edema. Treatment with the laser is low-pain and not pain-free. We recommend using anesthetics if necessary. The BeauLaser Lee may be operated only by trained and qualified personnel. All clinical procedures performed with...
Open the catalog to page 703 Laser radiation hazards To prevent personal injury and material damage, please observe the warning and safety information provided in this document. Such information is highlighted as follows: Laser radiation hazards Never direct the laser or aiming beam toward a person's eye! All persons present in the room e.g. patient, dentist and assistant must always wear the laser protective goggles. ^ WARNING Warning of bodily injury For an possible danger that could result in light to serious bodily injury. 04 Intended use The BeauLaser is developed as a table top laser device for: • Soft-tissue...
Open the catalog to page 815 inch color screen Laser stop key Easy tip Power line reel Operation interface
Open the catalog to page 9Continuous wave mode (CW) CW implies a continuous, uninterrupted laser beam as long as the laser is activated (and determined by a time set). This means a very good power control since the maximum power equals the average power. In adjacent example the laser is in CW mode with a power of 3 W. Pulse mode The average power is the product of power and duty cycle.The result is a better thermal control due to the fact that the OFF periods are used for thermal relaxation of the tissue.In adjacent example the laser is in chopped mode with a power of 3 W and a duty cycle of 20%. The average power...
Open the catalog to page 1009 Examples of treatment risk Surgery area Risk: Soft and hard tissue necrosis or overheating of the tooth. Countermeasure: Use the laser beam like a scalpel, holding it perpendicular to the surface under treatment, and never aim it at a single point for a longer period of time. Do not select excessively high power levels for the laser. A WARNING Never treat perpendicular to any bone surface. Endodontics area Root canal germ reduction Risk: Contractions in the apical region, small fusions and microfractures. Countermeasure: Measure the depth and stop 1 mm above the root apex. Never aim the...
Open the catalog to page 11When following these instructions wear gloves. Following treatment, switch off the BeauLaser and disconnect the power cable from the power supply. Control unit, handpiece body, handpiece tube and foot control are supposed to be cleaned and wipe-disinfected. Dispose the single use fiber tips. The removable stainless steal handpiece sleeve, therapy light guides, fibercutter and bending tool are supposed to be cleaned and sterilized. A CAUTION Do not clean and disinfect the parts using a washer-disinfector! The parts may be seriously damaged. Cleaning Manual cleaning must always be combined...
Open the catalog to page 12Fibercutter ➢ Clean the fiber cutter in the ultrasonic bath or with a suitable brush under running water (< 38 °C, water must be at least drinking water quality). Laser protective goggles ➢ Before cleaning the laser protective goggles, please read and observe the instructions for use provided by the manufacturer and attached to the goggles in the case. Disinfection Disinfect the upper mentioned parts by wipe disinfection:BeauLaser (wipe disinfection only) NOTICE Use only disinfectants that comply with the requirements of your national authorities and whose bactericidal, fungicidal and...
Open the catalog to page 13NOTICE Sterilize the therapy light guides in a packing material suitable for sterilization and storage to prevent scratching or chipping the light guides inthe autoclave. Do not exceed a temperature of 140 °C (284 °F) during the drying cycle. Do not abort the drying cycle before it has ended. Do not try to accelerate the cool-down process by placing the MultiTips in cold water. This could cause the therapy light guide to crack. CAUTION Store all components so that they are protected against contamination.Sterilize again once the storage period has elapsed. Cleaning the control unit Use a...
Open the catalog to page 14All YUWEILASER catalogs and technical brochures
-
Co2 Dental Laser
7 Pages
-
Portable 808
7 Pages
-
Pico
7 Pages
-
NIR Skin tightening
10 Pages
-
Fiber 808
7 Pages
-
F-DPL
11 Pages
-
Er yag 2940
10 Pages
-
EMSculpt
13 Pages
-
dpl
11 Pages
-
co2 fractional laser
10 Pages
-
Hair Removal
9 Pages
-
Products Catalog
15 Pages