Product Overview

This document provides technical details for the Gingiva Former Impression Caps and Laboratory Analogues, specifically models G36, G40, G50, G50R, and their zero variants (G36-0, G40-0, G50-0, G50R-0), as well as I36, I40, I50, I50R, and L36, L40, L50, L50R. These components are used in dental implantology for impression taking and laboratory procedures.

Instruments and Drills

The document lists compatible instruments and drills including HA12, RA16*, RA24*, TD170, CD355-1, CD455-1, and the implant model Z5m(t). Notably, RA16* and RA24* drills are also recommended for safe handling of the Z5c abutment during the gluing process.

Implant Specifications

The Z5m(t) implant is designed for immediate implantation and is suitable for soft bone qualities. The implant is available in two diameters: 4.0 mm and 5.0 mm, with lengths of 8 mm, 10 mm, and 12 mm. The specific product codes for each size and diameter are as follows:

• Ø 4.0 mm: Z5m(t)-40-08, Z5m(t)-40-10, Z5m(t)-40-12
• Ø 5.0 mm: Z5m(t)-50-08, Z5m(t)-50-10, Z5m(t)-50-12

Manufacturer Information

The products are manufactured by Z-Systems AG, located at Werkhofstrasse 5, CH-4702 Oensingen, Switzerland. Contact details include telephone +41 62 388 69 69 and email [email protected]. More information is available on their website www.zsystems.com.

Critical Notes and Recommendations

• Use of RA16* and RA24* drills is emphasized for safe handling of the Z5c abutment during gluing.
• The implant system is optimized for immediate implantation scenarios and soft bone conditions, indicating its clinical application scope.