Product Overview

This document provides technical details about Gingiva Former Impression Caps and Laboratory Analogues used in dental implantology, specifically for the Z-Systems implant line.

Product Range and Specifications

• Impression Caps and Analogues: Models include G36, G40, G50, G50R, and their zero variants (G36-0, G40-0, G50-0, G50R-0), as well as I36, I40, I50, I50R, L36, L40, L50, L50R.
• Instruments: HA12, RA16*, RA24* are specified for use, with RA16 and RA24 also recommended for safe handling of the Z5c abutment during gluing procedures.
• Implant Diameter Options: Available diameters are 3.6 mm, 4.0 mm, and 5.0 mm.
• Length Variants: Lengths are provided in millimeters with specific product codes for each diameter and length combination, for example, Z5m-40-08 for 4.0 mm diameter and 8 mm length.

Key Features and Usage

The Gingiva Former Impression Caps and Laboratory Analogues are designed to ensure accurate impression taking and laboratory modeling for dental implants. The instruments facilitate safe and precise handling, especially during abutment gluing.

Manufacturer Information

Produced by Z-Systems AG, located at Werkhofstrasse 5, CH-4702 Oensingen, Switzerland. Contact details include phone +41 62 388 69 69 and support email [email protected]. More information is available at www.zsystems.com.

Critical Notes

• RA16 and RA24 instruments have a dual function, including safe handling of the Z5c abutment during gluing.
• Product codes correspond to specific diameter and length combinations, which are critical for selecting the correct component.