Axiocam 512 color
8Pages

Product Information Version 1.1 ZEISS Axiocam 512 color Your 12 Megapixel Microscope Camera for Imaging of Large Sample Areas – Fast, in True Color, and High Resolution

Technical Specifications ZEISS Axiocam 512 color Sensor Model Sony ICX 834, EXview HAD CCD II ™ Progressive Scan Quad-Port Readout Selected sensor quality Sensor Pixel Count Pixel Size Sensor Size Effective sensor size: 13,2 mm x 8,8 mm; image diagonal 16 mm, equivalent to 1" sensor format Spectral Sensitivity Approx. 400 nm - 720 nm, coated Hoya C5000 IR Cut Filter RGB Bayer color filter mask Max Full Well Capacity (typical) Signal Amplification Readout Speed Readout Noise (typical) Dynamic Range (typical) Dark Current (typical) Regulated Peltier-cooling (power supply via USB 3.0 and USB...

Binning Modes and Frame Rates Binning Pixel Count (H x V) Mode FPS @ 1 ms 1x1 4248 x 2832 Color/Mono 10 (exposure time = 1ms) Color Interpolation Modes High Speed: optimum speed color interpolation High Quality: optimum quality color interpolation Maximum ratings at optimum hardware settings 10 frames/s 1 / slow 4248 x 2832 Data-Post Processing (optional) Objective specific shading correction Black reference, dark current compensation Color enhancement Special Features Time stamp from camera for precise acquisition time point Auto Switch Mode for Single Port / Dual Port / Quad Port Readout...

Technical Specifications Switchable Sensor Output Amplifier Single Port Readout for long exposure times for maximum signal quality Dual Port or Quad Port Readout for improved readout speed at full resolution Automatic port activation mode or full manual mode User defined imaging sub area for improvement of readout speed and reduction of amount of data Hardware Trigger Galvanic isolated I/O-signals Three output signals: exposure time, readout time, trigger ready, i.e. for controlling external mechanical shutters One trigger input for exposure control, 5V auxiliary voltage, GND Top LED:...

Technical Specifications Ambient Conditions (Operation) +5 °C ... +35 °C Max. 80% relative humidity, non-condensing Free air circulation required Ambient Conditions (Storage) -15 °C ... +60 °C 90% relative humidity at +40 °C, 80% relative humidity at +20 °C, non-condensing Operating System ZEN 2 starter/lite/core/pro/system, AxioVision SE64 4.9.1 SP2 or higher All frame rates are maximum values at short exposure times below readout time of the sensor. Exposure time, computer hardware operating system and software can reduce the maximum achievable frame rates. By using binning or sensor sub...

Technical Specifications Spectral Sensitivity Axiocam 512 color Relative Spectral Sensitivity incl. IR Filter Hoya 5000

Count on Service in the True Sense of the Word Because the ZEISS microscope system is one of your most important tools, we make sure it is always ready to perform. What’s more, we’ll see to it that you are employing all the options that get the best from your microscope. You can choose from a range of service products, each delivered by highly qualified ZEISS specialists who will support you long beyond the purchase of your system. Our aim is to enable you to experience those special moments that inspire your work. Repair. Maintain. Optimize. Attain maximum uptime with your microscope. A...

Carl Zeiss Microscopy GmbH 07745 Jena, Germany microscopy@zeiss.com www.zeiss.com/axiocam EN_40_011_104 | CZ 09-2016 | Design, scope of delivery and technical progress subject to change without notice. | © Carl Zeiss Microscopy GmbH Not for therapeutic, treatment or medical diagnostic evidence. Not all products are available in every country. Contact your local ZEISS representative for more information.