LOCATOR® ATTACHMENT SYSTEM FOR MULTI-UNIT ABUTMENTS
2Pages

{{requestButtons}}

Catalog excerpts

LOCATOR® ATTACHMENT SYSTEM FOR MULTI-UNIT ABUTMENTS - 1

CONVERT WITH CONFIDENCE Transition from a screw-retained fixed prosthesis to a removable overdenture solution with ease by utilizing the existing implant manufactured multi-unit abutments with the LOCATOR® Attachment System for Multi-Unit Abutments. Screw-Retained Solution with existing Implant Manufacturer Multi-Unit Abutments ✝Case Removable overdenture solution with the LOCATOR Attachment System for Multi-Unit Abutments images courtesy of Dr. Michael Steffen, Tulsa, OK. LOCATOR® ATTACHMENT SYSTEM FOR MULTI-UNIT ABUTMENTS • Self-aligning, dual retentive design to enhance engagement and stability of the overdenture • Low profile to maximize interocclusal space • Customizable levels of retention ZEST | DANVILLE MATERIALS | PER

Open the catalog to page 1
LOCATOR® ATTACHMENT SYSTEM FOR MULTI-UNIT ABUTMENTS - 2

Torque multi-unit abutments to manufacturer's recommended torque value and place LOCATOR Titanium Collar on each multi-unit abutment. Thread LOCATOR Abutments to multi-unit abutments and torque to 20 Ncm with LOCATOR Torque Wrench Driver. Proceed with the standard procedure of the LOCATOR Attachment System. Warning: The use of torque values higher than 20 Ncm could potentially fracture the Multi-Unit LOCATOR Abutment. Note: 5.35mm of vertical clearance is required from the shoulder of the multi-unit abutment. Designed for free-standing and castable bar-splinted applications. Multi-Unit...

Open the catalog to page 2

All Zest Dental Solutions catalogs and technical brochures

  1. LOCATOR®

    36 Pages

  2. LOCATOR F-Tx

    6 Pages

  3. LOCATOR R-Tx

    8 Pages