Zhangjiagang Medi Medical Equipment Co.ltd. www.medik-medical.com User Manual Three-function electric pediatric bed

Thanks for choosing our three-function electric pediatric bed YA-PD3-1. We will providethoughtful after-sales service in the whole process of using your products.Meanwhile, we hope to get your valuable opinions to innovate the technology inthe industry and better serve the treatment and nursing of patients. Zhangjiagang medi medical equipment co.,ltd. will do its best to avoid printingthe text or image errors, but not responsible for the possible negligence. Thecriterion for the goods are based on the standard of the material. Again, thank you for selecting this Stainless Steel Baby Crib MC-B07....

a ) Environment condition : — 40'C~+70'C b) atmospheric moisture : 10%—100% c ) atmospheric pressure : 500hPa—1060hPa

6 Central locking pedal

5. General introduction This electric bed is specially designed for the care of children during treatment and rehabilitation. By combining the beautiful design with the compact structure, the bed is widely accepted and used to reduce the workload of nurses and nurses, and provide patients with great comfort. All positions are realized by automatic motor control, thus providing patients with efficient care. Increase the guardrail to protect the safety of children and prevent falling from the bed. 6. Construction The frame of bed is constructed by international quality metal to guarantee its strength....

b) unlock the bed Step up the brake to unlock the bed Remote control With hand remote control , hanging on the side rail Hand remote 8. Bed function operation A) Operation of back section When the back section needs to be folded in normal use, press the left button of the control board, and the back section can be folded between degree 0-65, and in any degree, release the button will stop the operation. When it needs reposition, press the button on the right . B) fold up of the thigh board Press the left button, the thigh section can be folded up between degree 0-35, press the right button ,...

C) Adjust the bed surface Press the left button , then the bed can be lifted up, release the button, i.e. stop the operation, press the right button , the bed surface goes down. 9. Side rails operation 1) Lay down the side rail When the patient is coming off the bed , please hold the red grip and lift it up , meanwhile , pull the rail down to bed frame. Pulling rail down 2) Push up the side rail Hold the red grip and push the rail to the upright position when you hear a "Kaka". Infusion stand The IV stand has a four hook mechanism which can be folded. Height adjustable from , and it can be removable...

a) The nurse should use the nurse control to lock the function of the bed when a helpless patient takes use of the product. b) If there is no direct care, the bed and the side rails should be in a complete brake state. The distance from the bed surface to the ground should be the lowest. The urgent control button should be off. c) Each side of the bed is forbidden being seated 2 persons or exceeding the safe load. d) The body is not allowed to stand on the folding bed. e) The soft wire is forbidden taking as driving tools when the bed is moving. F)The parts need to be changed during the cause...

h) The reserve source of electrical power is electricized battery, so it doesn’t need maintenance. It just needs electricizing after use for many times to guaranty the self-life of the battery. i) The control board should be far from liquid, and no throwing, stamping, squeezing and roller compaction. j) It is forbidden moving on the rugged road. k) it is not allowed to be used or stored in corrosive gases (liquid). l) It must be operating by professional when repairing the electric appliance (e.g. Change fuse) before repair, it must to cut power off firstly; the plug socket must to be placed...

Pls scan the QR code for more info www.medik-medical.com www.mediksurgical.com