Filtered Sample Vial Sample Pre-treatment HPLC/UHPLC Cannabis │

Aijiren® series filtered sample vials are composed of an outer tube, a septum, and an inner insert with a 0.22μm or 0.45μm filter membrane at the bottom; providing a quick and simple solution for HPLC and UHPLC sample filtration preparation, which can be easily completed in just two steps, instantly and effortlessly before sample injection. It features high efficiency, simple use, easy pressing, and fast speed. There is no need to purchase syringes, sample vials, and caps, which greatly reduces the number of consumables used, and the simple steps reduce sample loss. The filtered sample vial will...

Shell material Sterilization Filtration volume Dead volume Maximum filtration pressure Filtration area Maximum operating temperature Packaging specifications Product Information Membrane Material Nylon Nylon PES PES PTFE PTFE PTFE PTFE PVDF PVDF PVDF PVDF RC RC Sample Vial Color Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Pre-slit Packaging Specifications

Nylon Nylon PES PES PTFE PTFE PTFE PTFE PVDF PVDF PVDF PVDF RC RC Nylon Nylon PES PES PTFE PTFE PTFE PTFE PVDF PVDF PVDF PVDF RC RC Nylon Nylon PES PES PTFE PTFE PTFE PTFE PVDF PVDF PVDF PVDF RC RC Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit Non-pre-slit...

Add liquid using a pipette into the outer tube of the filtered sample vial, up to the fill line. Place the filtration column into the sample cup and ensure it is sealed securely. Filtration Press the plunger slowly for about three seconds, and the filtrate passes through the filter membrane into the inner insert's core.

Multi-vial compressor instructions Load the external vials onto the vial holder plate Place the plate on the multicompressor vial, use the guide ribs for placement, and ensure the tray is firmly in place. Detach individual filter vials. Safety specifications: Weight 4.1 kg (9.04 lbs). Distribute the sample into the external vials, being careful not to overfill. The maximum fill level is clearly marked on the outer vial. After selecting the appropriate filter membrane for the sample (or solvent), insert the plunger. Release the lever back to its original position so that the tray can be removed....