Catalogue EN Solutions for the dental laboratory

Progress, constantly. Creating value, to make the quality of the products accessible to the world. With creativity, and especially with the ability to transform every challenge into a development opportunity. To dynamically seize the market trends and understand the needs of partners, clients and customers. To make our solutions accessible worldwide. All this is the basis of Zhermack’s growth, and since its foundation, over 35 years ago, the company has never ceased to develop and grow. The clarity of the dream continues to drive Zhermack along this road, to “make you feel confident in everyday...

Zhermack^T Dental «Zhermack is a company that is committed with constancy to creating value, to make the quality of its products accessible worldwide. Zhermack's success resides in its ability to be creative, to transform every challenge into a growth opportunity, and to be dynamic, in order to seize the market trends and understand the needs of partners, clients and end customers». Paolo Ambrosini General Manager

Our solutions. Specific products and solutions for the dental laboratory, conceived exploiting the skills acquired with materials for the dental practice. Starting from development and production of duplication silicones and masks, Zhermack has extended its offer with quality products such as dental stones, resins and investments to satisfy the needs of the numerous laboratory processes involved in the fabrication of fixed and removable prostheses. A system to accompany lab technicians in their daily work. We produce measurable results. Zhermack directly manages all the working stages - from...

CAD/CAM solutions Full and partial dentures 71 NOTE: The images and texts related to the technical data of the individual products and accessories may be changed during the period of validity of the catalogue. The images are only representative of the showed products. Not all products are sold in every country. For further information on product availability, please contact your local representative.

Solutions for the dental laboratory Zhermack Dental

Hygiene Impressions arriving from the dental practice are often contaminated with saliva and blood. Correct disinfection is vital to protect the health of laboratory technicians. Zhermack disinfectants with a broad spectrum of action are enhanced with surfactants to improve the flow of the stone during pouring. • Zeta 7 Spray (with surfactants) • Zeta 7 Solution (without surfactants) Model preparation An accurate model is the basis of every well-made prosthesis. Zhermack offers a complete system of impression materials, materials for models and equipment, all developed to be used as a system...

CAD/CAM solutions The CAD/CAM solutions developed by Zhermack combine traditional techniques (impression taking, model preparation, prosthesis) with the most innovative digital techniques. Saving time in data acquisition, simplifying and improving the quality of CAD/CAM processes. The Zhermack offer includes a wide range of scannable silicones and stones readable without using reflective sprays. BITE REGISTRATION

CAD/CAM solutions / Bite registration Characteristics • Accurate reproduction of details • 75 Shore A hardness • Mixing ratio 1:1 Advantages • Quicker working time to improve efficiency in the laboratory • Easy to finish, including with bur • Scannable without using reflective sprays Mixing time Working time* Setting time* (min:s) (min:s) (min:s) Elastic Strain in Linear dimensional Hardness Heat recovery compression change (after 24 h) (Shore A after 24 h) resistance *The times mentioned above are intended from the start of the mixing phase at 23 °C (73 °F). Platinum 75 CAD - A-Silicone for...

CAD/CAM solutions / Bite registration Developed for use in the dental practice, but also excellent for laboratory use, Occlufast CAD is an addition silicone for bite registration, scannable without using reflective sprays. The short working time allows the laboratory work to be optimised. Characteristics • Accurate reproduction of details • High hardness: 95 Shore A • Mixing ratio 1:1 • Setting time 60 seconds1 Advantages • Short setting time • Scannable without using reflective sprays • Easy to finish, including with a bur Mixing ratio Working time2 Setting time2 i-omvvwL™ Linear dimensional...

Elite Rock CAD/CAM solutions / Stone models Elite Master and Elite Rock are type 4 stones to make scannable master models without using reflective sprays. Elite Master is reinforced with resin particles, making the material easy to work and resistant to chipping. Elite Rock is an extra hard stone with high compressive strength, recommended for making master models for fixed prostheses. Elite Master is scannable in all colours, Elite Rock only in Silver Grey. Characteristics Elite Master: • Scannable without using reflective sprays • Formaldehyde free • Resistant to chipping Elite Rock: • Also...

CAD/CAM solutions / Gingival reproduction Gingifast CAD is a scannable fluid addition silicone, suitable for reproducing gingival morphology on models. The elastic version with high tear resistance is recommended in the presence of undercuts or very thin thicknesses. The rigid version is ideal for implant prosthesis applications. Characteristic • Two hardness versions: Elastic 40 Shore A, Rigid 70 Shore A • Rapid working times • Mixing ratio 1:1 Advantages • Time savings in data acquisition with CAD/CAM • Greater precision compared to use of reflective sprays • Compatible with both direct and...

Model preparation An accurate model is the basis of every well-made prosthesis. Possible errors during this phase have repercussions on subsequent phases and are extremely difficult to eliminate. Sensitive to the needs of lab technicians, Zhermack has designed a system of laboratory and impression materials able to work in synergy to obtain accurate models.