Prothyl Thermo EVO
12Pages

ESTHETIC APPEAL Denture Acrylic System

AN AESTHETIC AND FUNCTIONAL EVOLUTION The PROTHYL range of denture acrylics now comes with a new enhanced formula, EVO, 100% reliable in performance, colour stability and safety. For ZHERMACK, constant evolution means not just satisfying your needs, but also anticipating them by designing innovative products guaranteeing top performance. Our laboratory research has resulted in the introduction of the new prothyl hi-impact EVO with excellent impact resistance and extural strength and to the innovative development of prothyl thermo EVO. Aesthetic evolution: for each version of resin, PROTHYL...

Evolution in product safety: the PROTHYL EVO line has extremely low residual monomer values for maximum biocompatibility. Evolution in quality: lengthy R&D experience and a dedicated production site in compliance with ISO 13485 allows production of acrylic resins conforming to UNI EN ISO 20795-1. COLD RESINS type II (Ref. UNI EN ISO 20795-1) PROTHYL EVO cold-cure resins have residual monomer values way below the average for other products on the market. In particular, the results of the prothyl press EVO formula are excellent, making it the benchmark product in the range.

^commended Polyir Pressure-cured denture acrylic for casting techniques Cold<ure resin with one of the lowest residual monomer contents ORANGE PINK NORMAL PINK ORANGE PINK VEINED DEEP PINK VEINED NORMAL PINK VEINED TECHNICAL DATA Recommended curing times • Full dentures using the casting technique • Combined dentures • Implant retained dentures • Excellent fluidity and consistency in the casting phase • Colour stability over time • A colour match with prothyl repair EVO self-curing resin Maximum residual monomer content % Resin quantities Flexural strength Residual monomer

Heat-cured acrylic resin with flask casting technique Extraordinary impact resistance and flexural strength ORANGE PINK NORMAL PINK ORANGE PINK VEINED DEEP PINK VEINED NORMAL PINK VEINED • Full dentures • Combined dentures • Implant supported dentures • High impact resistance compared to standard acrylic • Excellent flexural strength thanks to the special formulation with elastomers • Colour stability over time • Excellent consistency during working and flask casting • Very low residual monomer Minimum bend Minimum breaking prothyl hi-impact EVOVS ISO 20795-1 prothyl hi-impact EVOVS ISO...

^^^^K -L^ RESIN FOR DEMTURFC Heat-cured denture acrylic for flask casting technique Rapid curing ORANGE PINK NORMAL PINK ORANGE PINK VEINED DEEP PINK VEINED NORMAL PINK VEINED TECHNICAL DATA Recommended curing times Resin quantities Flexural strength • Full dentures • Combined dentures • Implant supported dentures • A colour match with prothyl repair EVO self-curing resin • Easy to use thanks to the excellent consistency during working and flask • Excellent flexural strength Recommended curing Time (minutes) Residual monomer

Self-curing denture repair acrylic Perfect adhesion and colour match ORANGE PINK NORMAL PINK ORANGE PINK VEINED DEEP PINK VEINED NORMAL PINK VEINED TECHNICAL DATA Recommended curing times • Combined dentures • Denture extensions • Perfect adhesion with methyl methacrylate based resins • Colour match with prothyl press EVO and prothyl thermo EVO acrylics • Colour stability over time Resin quantities Flexural strength Residual monomer

Self-curing acrylic for individual impression trays (special trays) New colour for optimum performance • Individual impression trays (special trays) • Bite plates • Bases for mounting prosthetic teeth • Fixing plates for registration devices • Plastic and workable without being sticky • Rigid and stable during curing • Size stability guaranteed over time TECHNICAL DATA Recommended curing times 8 min at 23°C Resin quantities 22.5 g powder/16 ml liquid Flexural strength

to complete the range RELATED PRODUCTS elite® LC tray light-cured resin plates for individual impression trays (special trays) prothyl isolator alginate isolator acrylic stone-resin prothyl polisher polishing paste for resin and metal prothyl EVO shade guide prothyl ask EVO resin casting ask prothyl polimer polymeriser for boiling polimer 180 pressure polymeriser

For the last 30 years, Zhermack has been designing and producing SPECIFIC SILICONES FOR DENTAL LABORATORIES Zetalabor, titanium and platinum 85 and 95 are lab putty silicones characterised by high precision and rigidity. DUPLICATION SYSTEM Elite® double A-silicones in combination with the doublemix dispensing machine is the ideal solution for all types of duplication, thanks to their capacity to give consistant and precise results. MODEL SYSTEMS Stones in the elite® dental stones range in combination with the elite® mix mixer can satisfy the dental laboratory's every need for all...

ORANGE PINK ORANGE PINK VEINED DEEP PINK DEEP PINK VEINED NORMAL PINK NORMAL PINK VEINED ORANGE PINK ORANGE PINK VEINED DEEP PINK DEEP PINK VEINED NORMAL PINK NORMAL PINK VEINED PACKAGING Powder container 1 kg YELLOW Powder container 200 g ORANGE PINK - Prothyl press EVO liquid 100 ml ORANGE PINK VEINED - Prothyl press EVO powder 200 g DEEP PINK DEEP PINK VEINED NORMAL PINK NORMAL PINK VEINED - Elite double 16 fast 250+250 g - Prothyl press EVO syringe Prothyl EVO, shade guide Prothyl isolator bottle 250 ml Prothyl isolator bottle 1000 ml Prothyl polisher bottle 150 g Prothyl press EVO...

MEXICO AND CENTRAL AMERICA Tel. +52 - 1 - 55 - 91980497 info.mexico@zhermack.com SOUTH AMERICA Tel. +57 - 310 - 2601 777 info.colombia@zhermack.com Zhermack SpA Via Bovazecchino, 100 - 45021 Badia Polesine (RO) ITALY Tel. +39 - 0425 597611 Fax +39 - 0425 53596 info@zhermack.com www.zhermack.com