Certain® Implant System
16Pages

Your progress. Our promise: Certain® Implant System Ordering Information

D = Diameter • P = Restorative Platform Without DCD® With DCD All Implants include the corresponding Flat Cover Screw. T3 Implants: Have a Contemporary Hybrid Design with a T3 Surface (blasted and acid-etched with an average mean surface roughness value of1.4 pm) along the threaded portion of the Implant and Osseotite® Surface (acid-etched) on the collar part of the implant. DCD Surface: Discrete Crystalline Deposition of nanometer sized calcium phosphate crystals on the implant surface.

D = Diameter • P = Restorative Platform • EP = Emergence Profile Osseotite Tapered Implants Length All Implants include the corresponding Flat Cover Screw. Hybrid: Machined collar with the Osseotite Surface in the threaded portion. FOSS and Prevail Implants: Full Osseotite Surface on the collar and the threaded portion. Mechanical Iso-Latch Bone Profilers Mechanical iso-latch bone profilers work with the hand-piece and drill unit. Manual Bone Profilers

P = Restorative Platform • EP = Emergence Profile • H = Collar Height PS = Platform Switched • NPS = Non-Platform SwitchedCertain Implants have a color coded restorative platform with four different seating surfaces: 3.4 mm, 4.1 mm, 5.0 mm and 6.0 mm. PS Three different Emergence Profiles for the same Restorative Platform BellaTek® Encode® Healing Abutments I

P = Restorative Platform • EP = Emergence Profile • H = Collar Height Material: PEEK Plastic with Titanium Alloy connection Indications: • Guided soft-tissue healing of single- and multiple-unit provisional cement-retained restorations • Minimum interarch space of 7.0 mm • Maximum angulation of 15° • Intraoral use limited to 180 days • Immediate non-occlusal loading of single-unit provisional restorations • Multiple-unit restorations will require an evaluation of occlusal forces in lateral and protrusive excursions and masticatory forces to minimize the load on the provisional restorations...

P = Restorative Platform • EP = Emergence Profile • H = Collar Height GingiHue® Posts Material: Titanium Alloy With Titanium Nitride Coating Indications: • Single- and multi-unit cement-retained restorations • Areas of thin tissue where gingival discoloration is possible • Preparable to follow gingival contours • Conventional crown and bridge procedures • Maximum angulation correction of 15° • Minimum interarch space of 6.0 mm GingiHue Posts *GingiHue Posts do not include the screw, The final Gold-Tite® Screw (IUNIHG) must be ordered separately. Material: Titanium Alloy With Titanium...

Gold Alloy Cylinder Formulation UCLA Abutments Material: • Gold: Machined Gold Alloy Cylinder With Plastic Unitube • Castable: Delrin Plastic • Titanium: Titanium Alloy Indications: • Cement- and screw-retained restorations • Single- and multi-unit restorations • Laboratory fabricated custom abutments and bridges • For aesthetic restorations when tissue is limited • Maximum angulation correction of 30° • Minimum interarch space of 6.0 mm * These abutments do not include the screw. The final Gold-Tite Screw (IUNIHG) or the Titanium Screw (IUNIHT) must be ordered separately. ** These...

P = Restorative Platform • H = Collar Height • L = Length Low Profile Abutments Material: Titanium Alloy Indications: • Two-piece abutments for single-unit screw-retained restorations • One-piece abutments for multi-unit screw-retained restorations • Minimum interarch space of 7.5 mm • Minimum tissue height of 1.0 mm • Maximum angulation correction of 30° Low Profile Abutments Component/Abutment Compatibility Low Profile Retaining Screws Low Profile Laboratory Tools Low Profile Impression Copings & Analog Low Profile Provisional Restoration Components Low Profile Final Restoration Components

LOCATOR® Abutments P = Restorative Platform • H = Collar Height • L = Length LOCATOR R-Tx® Abutments Material: Abutment: Titanium Alloy With Titanium Nitride Coating Housing: Titanium Alloy. Inserts: Nylon Indications: • Tissue supported removable overdentures on 2-4 implants • Partially edentulous overdentures with one or more implants • Limited interarch distance • Angle correction with up to 40° between divergent implantss Material: Abutment: Titanium Alloy With DuraTec® Titanium Carbon Nitride Coating Housing: Titanium Alloy with pink anodization. Inserts: Nylon Indications: • Tissue...

Pick-Up Impression Copings Twist Lock™ Impression Copings Implant Laboratory Analogs 3.4 mmP Emergence Profile Restorative Platform Item # Restorative Platform Item # IMMILA Restorative Platform Item # IILA20 5.0 mmP Restorative Platform Description Item Number Emergence Profile Restorative Platform 6.0 mmP Emergence Profile Item # 6.0 mmP Description Restorative Platform Item Number Torque Driver Kits *Included In The Low Torque Indicating Ratchet Wrench Kit Drivers, Driver Tips & Miscellaneous Items Abutment Screws For use with PreFormance Posts and Temporary Cylinders, FlexLink TiBase,...

P = Restorative Platform • EP = Emergence Profile • D = Diameter • L = Length Tapered Implant Dense Bone Tap Kit (Included in the QNTSK40 Surgical Kit) Tapered Implant Surgical Kit Description *Surgical Kits include the new Internal Connection Universal Placement Driver Tips (IIPDTUL, IIPDTUS) with GemLock Technology, where available. **The Handpiece Connector (MDR10) and The Ratchet Wrench Extensions (RE100, RE200) are used for the Dense Bone Taps and the External Hex Implant Mounts. High Torque Indicating Ratchet Wrench* Description Item # High Torque Indicating Ratchet Wrench H-TIRW...

12 P = Restorative Platform • EP = Emergence Profile • D = Diameter • L = Length SLIMKT (Slim Surgical Kit For Tapered Implants) Tapered Implant Slim Surgical Kit Description Surgical Kits include the new Internal Connection Universal Placement Driver Tips (IIPDTUL, IIPDTUS) with GemLock Technology, where available *The Handpiece Connector (MDR10) and The Ratchet Wrench Extension (RE100) are used for the Dense Bone Taps and the External Hex Implant Mounts.