THE CHAIRSIDE ATTACHMENT PROCESSING MATERIAL YOU HAVE BEEN WAITING FOR.

When You Have To Do A Pick-Up — Pick ZEST! S-k . Introducing — a new and unique Attachment Processing Material from ZEST Anchors, the manufacturer of the trusted LOCATOR® Attachment and LOCATOR Overdenture Implant (LODI) System. CHAIRSIDE® Attachment Processing Material was designed for ease of use and predictability when processing attachment components into overdentures, including ZEST's LOCATOR and SATURNO™ Denture Caps. Clinician input contributed to a formulation that has the most sought after handling characteristics, which requires no primer, and is self-curing — all at a reduced cost...

Six Simple Steps For Chairside Processing LOCATOR® Attachments Into Overdentures 1. Place a White Block Out Spacer Ring around each abutment and press it down to the tissue. Place a Denture Cap with a Black Processing Male onto each abutment and press down firmly to ensure engagement of the abutment. 2. Apply fit check marking paste inside the denture. Insert it into the mouth over the Denture Caps. Mark the areas where the denture will need to be relieved to allow space for the caps to be picked up. 3. Relieve the areas marked with an acrylic bur. Try in the denture to verify that the Denture...

Attachment Processing Material ITEM NUMBER Try CHAIRSIDE Attachment Processing Material ZEST ANCHORS 2061 WINERIDGE PLACE ESCONDIDO, CA 92029 USA GLOBAL HEADQUARTERS 4555 RIVERSIDE DRIVE PALM BEACH GARDENS, FL 33410 TOLL FREE: 1 -800-342-5454 PHONE: +1-561-776-6700 FAX: +1-561-776-1272 www.biomet3i.com ©2015 ZEST Anchors LLC. All rights reserved. L9202 REVB 08/15 CFHAIRSIDE, LOCATOR and ZEST are registered trademarks and SATURNO is a trademark of ZEST IP Holdings, LLC.