Malt Analysis Sample Preparation Platform
6Pages

Malt Analysis Sample Preparation Platform Automate the Malt Analysis Preparation Process

Designed for your processes Zinsser Analytic designed a liquid handling platform for automated malt analysis with high throughput and validated workflows. Processes such as the extraction of malt/groats, the subsequent and independent filtration, in addition to further analysis preparation can be completed with our solution. Further analysis such as turbidimetry, flavor color, density/viscosity, dissolved nitrogen, beta-glucan and final fermentation of extracts. Precise Dispensing of Temperate Water to Malt Samples Gravimetric or Volumetric Aspiration and Dispensing of Solutions...

HARDWARE DESIGN The hardware was designed for flexible use of one to maximum four filtration racks in addition to pipetting racks (without a filtration adapter) solemnly for pipetting steps. Target racks for further analysis (with filter tubes, flexible vibrating tubes or Falcon™ tubes). Standard pipetting tip. One of four positions where a rack with/out filter adapter. Magnetic gripper for stainless steel beakers and retention of stirring bar. Filtration racks with filters; one to four can be placed on the platform. Magnetic stirrer and drying station. Bottle for liquid waste. Temperature...

PROCESSES OF MALT ANALYSIS • Maximum two racks of 48 stainless steel beakers each with malt samples and magnetic stirrers (initial weight known). MASHING PROCESS: • Dispense temperature controlled water in malt-containing beakers, with a dosage manifold of six pipetting tools. • Temperature control with internal and external temperature sensors. • Defined process temperatures with time intervals. • Extraction of malt/groats in 80 mL water. • At the end of process cooling to 20 °C. FILTRATION PROCESS: • Can be started separately and consecutively after malt process started. • Software obtains...

SOFTWARE SOLUTION FOR YOUR SPECIFIC PROCESS Every process step is designed modularly. Therefore a variety of processes, using differing powders, chemicals and solvents, may be completed. The customised sequential arrangement of the process is composed with a specified MS Excel® file or our Worklist-Generator which is then executed with our WinLissy®-software. With the Worklist-Generator you can create individual processes with many adjustable parameters for sub steps. Worklist Generator Drag and drop the needed methods to the desired positions of the worklist. Pipetting Editor For pipetting...

AMERICAS Zinsser NA, Inc. 19145 Parthenia Street Suite C Northridge, CA 91324 USA Tel: +1 818 341 2906 Fax: +1 818 341 2927 info@zinsserna.com HEADQUARTERS Gardner Denver Thomas GmbH Livry-Gargan-Str. 10 82256 Furstenfeldbruck Germany Tel: +49 8141 2280 0 Fax: +49 8141 8892136 thomas.de@gardnerdenver.com EMEA Zinsser Analytic GmbH Schwalbacher Str. 62 65760 Eschborn Germany Tel: +49 6196 58693 0 Fax: +49 6196 58693 80 info.zinsser-analytic@gardnerdenver.com Please check out all our brands for your mission-critical flow control technologies: THOMAS by Gardner Denver WELCH by Gardner Denver...