SINTERMETALL Dimensionally stable material milled in your own laboratory

SINTERMETALL The cobalt-chromium blanks (non-precious metal) are highly pre-compressed and slightly sintered. This permits to mill all dental restorations using a pre-sintered material. Thanks to the shrinkage factor of just 7 %, the material’s torsional stability during the sintering process is very high. Like this, all milled dental restorations (full-arch bridges, single crowns, metal frameworks, telescopic crowns, bars, attachments) can be sintered with a total lack of stresses. High performance cobalt-chromium alloy Neither distortions nor stresses in the metal frameworks No impurities in...

PERFECT STABILITY Bar milled in a Sintermetall 95H10 blank Stable substructure for zirconia, resin and ceramics. It can be electroplated

SINTERING WITHOUT SHIELDING GAS SINTERING WITHOUT RESIDUAL OXIDATION Combustion chamber of the Zirkonofen 700 Ultra-Vakuum sintering furnace for up to 120 zirconia and 25 Sintermetall elements. Combustion chamber of the Sinterofen 300S sintering furnace for approximately 50 Sintermetall elements; it is possible to sinter 2 full-arch bridges or 6 bars in one process. ACCESSORIES Zirkonofen 700 Ultra-Vakuum sintering furnace Sinterofen 300S sintering furnace Sintering Tray Sintermetall (ZBAC2186) Sintering Tray Sintermetall XL 300S (ZBAC2187) Tray for sintering Sintermetall jobs with up to 5 elements...

THE MATERIAL Deformation resistant sinter metal for the manufacture of structures ranging from single crowns to 14-unit bridges, metal frameworks, telescopic crowns, bars, dowels and attachments in one’s own laboratory. Dry processing with all Zirkonzahn milling units (except M1 Abutment milling unit) using CAD/CAM Milling Burs Sintermetall; electroplating as well as veneering with ceramics is possible (consider CTE value). Milled 14-unit Sintermetall structure Zirkonzahn Sintermetall blank Item number Use with Sintering Powder Supreme only (ZBAC3831). Material blanks in different heights and...

SINTEROFEN 300S SINTERING FURNACE FOR SINTERMETALL High vacuum pump for oxygen-free sintering Sintering without shielding gas; no residual oxides Large combustion chamber for around 50 Sintermetall elements With the special Sintering Holder XL 300S it is possible to sinter 2 full-arch bridges or 6 bars in just one sintering cycle Automatically controlled cooling Modern high quality full glazing 4,3” colour touchscreen control panel showing the sintering process and remaining time Low maintenance, very robust H U M A N Z I RCON I U M T EC H NOL O GY Zirkonzahn Worldwide – Tel +39 0474 066 680...