*mymedicalexpo

Catalogs
Zirkonzahn
Insert ICE Plus

Insert ICE Plus

Product catalog summary

Introduction: The document discusses the use of ICE Plus zirconia for upper and lower jaw restorations on four implants each, highlighting the Zirkonzahn culture and technology.

Initial Situation: A male patient with previous Pekkton PMMA temporary restorations and four implants in each jaw is the subject of the planned restoration.

Planned Restoration: The restoration involves upper and lower superstructures made from Prettau® 2 Dispersive® on ICE Plus zirconia substructures.

Workflow:

Implant positions are acquired using photogrammetry and soft tissue data with an intraoral scanner.
Super- and substructures are printed for a try-in.
Upon positive evaluation, digital design of full arches in Prettau® 2 Dispersive® zirconia and substructures in ICE Plus zirconia is completed.
Structures are milled using Zirkonzahn M1 Wet Heavy Metal and M2 Teleskoper units, followed by sintering.
Superstructures are bonded to substructures, with minimal layering and characterisation using ICE Ceramics and ICE Stains 3D.
The restoration is polished and handed over for insertion.

Material Properties: ICE Plus zirconia offers excellent flexural strength (1,900 MPa) and is metal-free, ensuring aesthetic and stable long-term restorations.

Product Information: Prettau® 2 Dispersive® zirconia is pre-coloured with a natural gradient, providing optimal strength and translucency, suitable for various dental applications.

Additional Information: The document includes contact details for Zirkonzahn Worldwide and notes that product availability may vary by country.

Catalog excerpts

as ICE PLUS The Zirkonzahn Culture

Open the catalog to page 1

Initial situation: Male patient with previous Pekkton PMMA immediate temporary and 4 implants in each jaw Planned restoration: Upper and lower superstructures in Prettau® 2 Dispersive® on ICE Plus zirconia substructures Workflow: - Acquisition of implant positions using photogrammetry technology, and soft tissue data using an intraoral scanner; definition of the smile design - Printing of super- and substructures for a first try-in in the patient’s mouth - After a positive evaluation by the dentist and the patient, digital design of the upper and lower full arch in Prettau® 2 Dispersive® zirconia...

Open the catalog to page 2

AESTHETIC AND STABLE LONG-TERM RESTORATION: 100 % METAL FREE Dr. Anne-Maree Cole – The Littleton Cole Dental Centre, Brisbane, Australia DT Werner Sauer – Werner Sauer Smile Design, Brisbane, Australi

Open the catalog to page 3

MORE INFO ABOUT ICE PLUS ZIRCONIA NEW! ICE PLUS Zirconia with excellent flexural strength (1,900 MPa), ideal for the fabrication of metal-free reduced structures. PRETTAU® 2 DISPERSIVE® Pre-coloured zirconia with a natural colour gradient which offers optimal flexural strength and exceptionally high translucency. It is ideal for various applications, including single crowns, inlays, onlays, veneers, and full arches (whether reduced or monolithic structures). Thanks to its monolithic design, it avoids the risk of ceramic chipping and ensures there is no abrasion of the antagonist. Additionally,...

Open the catalog to page 4

All Zirkonzahn catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list