Overview of Telescoper Orbit Milling Blanks

The document presents specifications and capabilities of the Telescoper Orbit milling blanks, focusing on different diameters (Ø 95 mm, Ø 106 mm, and Ø 125 mm) and their applications in dental prosthetics.

Specifications and Material Options

• Diameter Options: 95 mm, 106 mm, and 125 mm (extra-large).
• Material Compatibility: Zirconia and resin materials are supported, with the Ø 106 mm blanks available for common materials including zirconia and resin, and the Ø 125 mm blanks primarily for common resins.
• Element Counts per Blank Size: The number of zirconia and resin elements varies by blank size, for example:
  • Ø 95 mm: 23 zirconia elements, 34 resin elements, 2 bite splints.
  • Ø 106 mm: 25 zirconia elements, 36 resin elements, 2 bite splints.
  • Ø 125 mm: 31 zirconia elements, 44 resin elements, 3 bite splints.

Product Features and Milling Unit Compatibility

• New Extra Large Telescoper Orbit (Ø 125 mm): Designed to increase milling capacity and efficiency.
• M2 Milling Unit Comfort Line: Features perfect friction adjustment for telescopes and enhanced efficiency through double milling chambers (wet and dry).
• Compatibility: The Ø 125 mm blanks are compatible with the M2 Milling Unit series and the M4 Wet Heavy Metal Milling Unit.

Production Capacity per Blank

The document provides indicative production capabilities for each blank size, including the number of prosthetic units that can be milled:

• Ø 95 mm blank: 1 full-arch, 2 four-unit bridges, 5 single crowns, and 2 bite splints.
• Ø 106 mm blank: 1 full-arch, 2 four-unit bridges, 4 single crowns, and 2 bite splints.
• Ø 125 mm blank: 1 full-arch, 3 four-unit bridges, 21 single crowns, and 4 bite splints.

Additional Notes

• All information is subject to change; errors and omissions excepted.
• Contact details for Zirkonzahn Worldwide are provided for further inquiries.