27-inch FHD Surgical Display with Optical Bonding AR+AF+AG Glass Version 1.6

MS2270P 27inch FHD Surgical Display Specification v1.4 This document defines the performance requirements for a 27" TFT LCD monitor

MS2270P 27inch FHD Surgical Display Specification v1.4 for medical surgical application. This high-brightness and optical bonding AR+AF+AG glass color display is specifically designed to meet the rigorous performance standards needed for endoscope, surgical operation room, and other medical applications. This monitor is factory calibrated to achieve DICOM part 3.14 at the factory set point through 14-bit LUT built-in. The surface of the monitor has an optical direct bonding AR glass and a hard coating to reduce scratch. Besides, this product contains a touch key, which would improve the experience...

MS2270P 27inch FHD Surgical Display Specification v1.4 2.2 Color Coordinates (CIE1931) Item 2.3 LUT Features This product contains serials LUT curves for using in different applications. Gamma1.8 / Gamma2.0/ Gamma2.2 / Gamma2.4/ Gamma2.6/SRGB/ Dicom

MS2270P 27inch FHD Surgical Display Specification v1.4 □ Optical direct bonding with AR and AF coating glass.

MS2270P 27inch FHD Surgical Display Specification vl.4 The display is complied with VESA DPMS and EPA power saving management. This product provides these interfaces as showed below. • SDI x 2, one for 3G-SDI input and the another is 3G-SDI loop-out. • DVI x 2, one for single-link DVI input and the another is DVI loop-out. • HDMI x 1, support HDMI 2.0. • USB3.0 x 3, USB3.0 type B for upstream, two USB3.0 type A for downstream. • DC Power, DIN-4, for +24V DC power supply input. Note. The two 2*USB 3.0 type A connectors support Host mode only. Each stack is limited to 1A total power delivery.

MS2270P 27inch FHD Surgical Display Specification v1.4 Note: ×Not available 3.5 Panel and Glass Defect TBD (Refer Panel Manufacture’s Original IIS) 3.6 Environmental conditions Operating temperature: Operating Humidity: Storage temperature: Storage Humidity:

MS2270P 27inch FHD Surgical Display Specification v1.4 This product contains a touch pad at the right-bottom of front side, and this will provide user a sufficient operating. From left to right, the menu index is MENU. UP. DOWN. EXIT. POWER. 1. To trigger the power key's function, please press and hold the key with 3s. 2. The blue LED means key function active, red and green LEDs indicate the state of signal input.

MS2270P 27inch FHD Surgical Display Specification v1.4 Main Menu

MS2270P 27inch FHD Surgical Display Specification v1.4

MS2270P 27inch FHD Surgical Display Specification v1.4

MS2270P 27inch FHD Surgical Display Specification v1.4 5 Mechanical Characteristics 5.1 Out dimension

MS2270P 27inch FHD Surgical Display Specification v1.4 5.2 Weight Net Weight: 8.2kg without Stand Gross Weight: 11.8 kg The carrier board will be supplied with these accessories as below.

MS2270P 27inch FHD Surgical Display Specification v1.4 Designed life time: >87600 hours operation. Environment test condition: CE (EN55024:2010, EN55032:2012, EN61000-3-2:2014, EN61000-3-3:2013) Class B, IEC60601-1-2:2014 (4th Edition) Class B RoHS Compliance: RoHS directive 2011/65/EU With amendment (EU) 2015/863