DC Ceram 12.5
24Pages

Product Catalog DENTAL CERAMIC

Press Ceramic DC Ceram™ 12.5 PTM special colors DC Ceram™ 12.5 PTM Dentin+ special colors DC Ceram™ 12.5 PTM Interface Corrector Layer Ceramic DC Ceram™ 12.5 Paste Opaque DC Ceram™ 12.5 Paste Opaque special colors DC Ceram™ 12.5 Chroma Dentin DC Ceram™ 12.5 Mamelon Dentin DC Ceram™ 12.5 Cervical Transparent DC Ceram™ 12.5 Powder Stains and Shades DC Ceram™ 12.5 Paste Stains and Shades Ceramay Build Liquids DC Ceram™ 12.5 Interface Test kit DC Ceram™ 12.5 Layer Test kit More products from Zubler Flex Ring System 18 Base former and Leveling Top Base Former / Leveling Top 19 Disposable Press...

Layer and Press Ceramic In 2014, a new two-phase leucite glass-ceramic DC Ceram™ 12.5 was introduced for crowns and bridges on alloys with conventional CTE. The core of this development is an innovative base material, which is introduced by the increased light through reflective opalescent elements, and thus gives the ceramic a natural brightness. Their extraordinary brilliance and natural beauty stands out, even when processing very little material. Dentin and Chroma dentin in 16 Vita shades are matched in translucency and fluorescence so that highly aesthetic restorations can be easily...

Technical Data: ■ CTE after firing (25 - 500°C) [10-6 . K] 12.5 ■ Flexural Strength > 90 MPa ■ Chem. Solubility < 30 μg x cm-2 ■ transformation temperature [°C] 505 Chroma Dentin or modifier framework structure Shade Combination Table1: Shade Chroma Dentin A1 - D4 are part of the VITA shade system. VITA is a registered trademark of VITA Zahnfabrik. General Firing Table (Temp °C): Closing Time Start Temp. 1. Hi Temp 2. Hi Temp in min in °C in °C in °C Heat Rate in °C/min Hold Temp. Open Time in °C in min

Press Ceramic DC Ceram™ 12.5 Press-to-Metal DC Ceram™ 12.5 pressable ceramics were developed as veneering material for pressing with conventional alloys CTE (13.8 to 14.6 μ / mK). With this technique, the dental technician has the ability to control the contour of a ceramic veneer without dimensional changes. Shoulders in the pressing technique, produced implant emergence profile or perfectly fitting for ceramic restorations are of the highest quality. The DC Ceram™ 12.5 pressable ceramics may not be used as a standalone framework. Product DC Ceram™ 12.5 PTM special colors The DC Ceram™...

Press Ceramic DC Ceram™ 12.5 PTM Dentin+ special colors The DC Ceram ™ 12.5 press-to-metal dentin and special colors are useful in areas with limited space. The intense chroma in thin layer thicknesses enhances the natural qualities of the ceramics without any increase in opacity. Product DC Ceram™ 12.5 PTM Interface Only 5 pellets are used for all 16 colors of the Vita® Classic shade system when pressing to metal frameworks, opening a new dimension in ceramic veneering. Porcelain shoulders, occlusal surfaces with perfect anatomy and function or emergence profiles cannot be made of higher...

DC Ceram™ 12.5 Interface Correction For corrections to DC Ceram™ 12.5 Interface objects. Opaque (paste or powder) The fluorescent opaque with a working tempera- ture between 950 °C and 980 °C has a high opa- city and guarantees a perfect bond between the dental alloy and ceramic. For the layer and press-on technique.

Layering Ceramic DC Ceram™ 12.5 Paste Opaque special colors For individualized and characterization in the opaque area. They can also be used when mixing with standard colors to create custom colors. Product Orange Brown DC Ceram™ 12.5 Margin The DC Ceram ™ 12.5 Margin materials enable the production of ceramic shoulders with metal-ceramic restorations. They are characterized by high stability, low shrinkage and excellent light-optical effect in the gingival area. Product

Layering Ceramic DC Ceram™ 12.5 Dentin 3 - 16 Only three ceramic materials for 16 colors of the Vita shade system. The reduction of the required ceramics to a minimum and the faster implementation of modeling are an economical and sophisticated solution for the manufacture of high quality ceramic veneers. Product DC Ceram™ 12.5 Chroma Dentin Even at the lowest thicknesses of ceramic DC Ceram 12.5 Chroma Dentin produces a natural depth to the ceramic veneer. You can use it for enhancing the chroma and also mix it with the regular dentin to produce custom shades. Product

Layering Ceramic DC Ceram™ 12.5 Dentin All the dentins of this ceramic contain an innovative base material that expresses a natural brightness which is introduced by the light reflective qualities of opalescent elements. Product Value Enhancer Dentin Corrector DC Ceram™ 12.5 Mamelon Dentin The Mamelon Dentins are available in five color gradations. They have a slightly increased opacity and can thus also be used effectively in small amounts for simple characterization in the mamalon area. Product

Layering Ceramic DC Ceram™ 12.5 Cutting The standard cutting Enamel 57 - Enamel 60 ensure reproducible results in stratification even in limited space. Opalescent play in the matrix increase the effect of the interaction of light in the natural tooth. In addition different effect cutting materials for individualization are available. Product Enamel White Enamel Yellow Enamel Orange Enamel Grey/Violet Enamel Korrekturmasse DC Ceram™ 12.5 Transparent opal The opalescent transparent materials are available in various shades and are used to individualize the incisal portion of the restoration....

Layering Ceramic DC Ceram™ 12.5 Cervical Transparent To increase transparency in the cervical portion. The increased fluorescence prevents graying of the ceramic in the subgingival area. Product Margin Yellow Margin Orange Margin Salmon Margin Khaki DC Ceram™ 12.5 Powder Stains The Shades in powder (AD) are used for individual characterization of the corresponding color group. Particularly in the processing of 3-16 Dentin Shades and are a fundamental part of the art. In contrast to the fluorescent stains with its light enhancing effect the intensive stains are used for chromatic...