Lithium disilicate - The high strength pressed ceramic! ■ Natural Aesthetic Fit with excellent surface finish Stackable Pellets The optimal material usage via the compatibility of stackable ingots helps Reduce costly residual losses in the form of buttons. Especially through the use of 2 g ingots in the pressing of 1-2 units, the material costs of the laboratory are significantly reduced. Ingot concept with the highest efficiency for the dental laboratory Strength With a strength of 420 MPa, lithium disilicate is the most stable pressable all-ceramic on the market. Dentists, dental technicians...

Press Ceramic Pellets The ingot concept - ingots in three levels of opacity Other Highlights The conceptPress ingots are available in three different opacities or translucencies. The ingot selection depends on the type of restoration, the clinical conditions in the patient‘s mouth and the processing technology used by the dental technician. ConceptPress is a ceramic material with a natural fluorescence. So conceptPress Press ceramic corresponds to the optical properties of natural teeth in difficult, very faint or low light environments. Shaded ingots are available from A1-D4 and are optimally...

Paste stains for zirconium oxide and lithium disilicate These colors whether used for the stain technique or for individual characterization as „internal stains“, require little effort to achieve excellent results from pressed, milled or layered ceramic. Their consistency is matched to the respective application. The shades lower viscosity provides easier application though a wide area allowing for a homogenous appearance after firing. The Modifier‘s thick consistency facilitates the ceramist targeted characterization of ceramic works. Fluorescent pastel stains 15 stains from the chroma, modifier,...

!Press ceramic oven with patented technology lithium disilicate ceramics! ADVANCED PRESS™ Ceramay GmbH & Co.KG