SUCTION SYSTEMS Accessories
11Pages

{{requestButtons}}

Catalog excerpts

SUCTION SYSTEMS Accessories - 1

SUCTION SYSTEMS Accessories s'zubler dental&technik SUCTION ACCESSORIES

Open the catalog to page 1
SUCTION SYSTEMS Accessories - 2

R1260 Gold Filter The R1260 uses fine filtration mesh screens for catching gold at the source. Suitable for use with R1250 & R1251 suction funnels, this gold filter system can be inserted easily. Item No.: 825/234 To properly benefit from and utilize a functionally flawless extraction system, it is important that all of the components in the system match perfectly. Thus, we offer an extensive line of accessories that are specially designed for different purposes of use in the dental laboratory and the industry and which are fitted to perfectly match the suction systems of Zubler. R1200...

Open the catalog to page 2
SUCTION SYSTEMS Accessories - 3

The R1000 with an inner dimension of 75 x 25 mm and a length of 415 mm was designed for use with most dental furniture. The special geometry of its inner channel reduces noise by air turbulences already to a minimum. The hose connection is available in diameters of 36 mm or 40 mm. The R1100 rectangular tube silencer fits all standard rectangular tubes with an inside dimension of 75 mm x 25 mm and a minimum length of 415 mm. Reduces suction noise immediately after the suction funnel, to achieve the highest possible noise reduction. R1300 Extendable Rectangular Pipe The R1300 extendable...

Open the catalog to page 3
SUCTION SYSTEMS Accessories - 4

AP500/AP501 Suction Port Opener Blasting sand sent into the pipes of a suction system has a destructive effect. The wall thickness of hoses and pipes can diminish over time, especially at reducers and arcs, to the point of producing a hole. Blasting sand should be caught directly at the source before it enters the pipes. The S1 pre-separator is designed for connection of up to three sandblasters and uses a bucket for easy removal of the used sand. The AP500/AP501 is the suction port opener for all common technical equipment. The sensitivity can be calibrated automatically or manually. The...

Open the catalog to page 4
SUCTION SYSTEMS Accessories - 5

ST02 suction socket-outlets can be mounted in the particular areas of the laboratory. Cleaning accessories RS1/RS2 can be utilized in conjunction with the suction system to comprehensively clean floors and workspaces quickly and conveniently throughout the laboratory. Suitable for our central suction systems. The R1700 spray box was designed to draw away the particles from scan sprays prior to scanning. Thanks to its unique design, the box allows the user to achieve optimal angle and movement, combined with an efficient suction power. The connection of the hose is available in 36 mm or 40...

Open the catalog to page 5
SUCTION SYSTEMS Accessories - 6

Suction Hose As our suction systems are utilized for a variety of applications, we can offer an extensive range of different filter bags made of different materials, specifically suited for your field of application. The possibilities of use range from plaster dust and plastic chips to laser dust. Suitable for suction systems V4010 / V4011 / Z1-AT / Z1-Mobile Suitable for suction systems V4050 / V4051 / V4250 / V4251 / Z1-Mobile with wide filter door Suction Hose Internal diameter 38 mm Item No.: 530/0112 Outer diameter 6 mm Item No.: 530/302 Suction Hose Exhaust Hose Internal diameter 76...

Open the catalog to page 6
SUCTION SYSTEMS Accessories - 7

Fine Filter Cartridge Activated Carbon Filter Suitable for suction systems V4000-series / V5000 / Z1-Mobile Fine Filter Cartridge Activated Carbon Filter Suitable for suction system Z1-AT Suitable for suction system Z1-AT Fine Filter Cartridge Fine Filter Cartridge 10 square meters of filter area Suitable for suction systems FZ10 / FZ20 / FZ30 / EF10 5 square meters of filter area Suitable for suction systems FZ5 / FZ5/2 / EF5 Fine Filter Cartridge Designed to operate with Zubler extraction systems, we offer ultra fine filter cartridges of different materials, suitable for various...

Open the catalog to page 7
SUCTION SYSTEMS Accessories - 8

Technical data: Both, quality and quantity, are a prerequisite for an economically working laboratory. It starts usually in production scheduling. Here the foundation is laid for high-quality work. Therefore, special emphasis was placed on ergonomics, cleanliness and efficiency in developing the preparation box by Zubler. Through an integrated blow-off nozzle which is actuated by a foot switch, plaster models can be air-blown in the box. The protective glass and work block can be swung upwards. By removing the funnel, the drip pan can be removed and washed easily. Dimensions: (width x...

Open the catalog to page 8
SUCTION SYSTEMS Accessories - 9

MB1000 Monomer Box In the same design as the work preparation box AV 1000, Zubler offers a monomer box that is suitable for exhausting toxic fumes that arise while mixing plastic monomer. The vapors in the box are pulled downward, and will be suctioned through the grid-like pad directly into the suction system. Please note that an extraction system with activated carbon filter or a central suction system should be used to exhaust air outside of the building or facility. Technical data: Dimensions: (width x height x depth): Weight: MB1000 - Item No.: 825/315 FG1000 (pedestal) - Item No.:...

Open the catalog to page 9
SUCTION SYSTEMS Accessories - 10

Handpiece holder with digital rotation speed indicator The new knee device included with Zubler‘s VARIOstar K50 combines the main control panel and knee pedal into a single assembly. Perfect for everyday laboratory work, this configuration saves counter space and floor space. Rotation Speed Indicator Easy to read and continuous Knee control unit Contains: 804 - 3012 Knee control unit 220 V - 240 V 804 - 3011 Knee control unit115 V 804 - 3002 Handpiece with chuck Ø 2,35 mm 804 - 3152 Safety Switch Speed Control Unlock the maximum rotation speed Tabletop unit with Foot pedal Contains: 804 -...

Open the catalog to page 10
SUCTION SYSTEMS Accessories - 11

--zublef dental&technik Zubler Geratebau GmbH Buchbrunnenweg 26 D-89081 Ulm-Jungingen

Open the catalog to page 11

All ZUBLER catalogs and technical brochures

  1. Z1-AT

    5 Pages

  2. Z1-M Series

    5 Pages

  3. Z1 series

    12 Pages

  4. easy fix

    2 Pages

  5. VARIO S400

    5 Pages

  6. Vario SC

    2 Pages

  7. vario_200_zr

    5 Pages

  8. Vario star

    5 Pages

  9. DC Ceram 9.2

    28 Pages

  10. DC Ceram 12.5

    24 Pages