Press Ceramic Oven FURNACE EQUIPMENT

The ADVANCED PRESS & CERAMIC oven! ■ 500 Programs, each individually programmable Individually pre-programmed upon request Developed as a press oven and outstanding as a ceramic oven Patented pressing process for lithium disilicate* ADVANCED PRESS™ Process* The patented ADVANCED PRESS™ process ensures a uniform temperature distribution from the temperature sensor of the press furnace to the inside of the press ring. Pressing always takes place within the ideal temperature range for pressing lithium disilicate. Thus hardly any reaction layer is created on the surface. This is enhanced by an extremely...

Standard Pressing Process: with patented technology for processing lithium disilicate ceramics! The graph depicts the standard temperature difference between the interior of the ring and the chamber during a traditional press cycle, approximately 40°C. The vast temperature difference between the ideal pressing temperature for lithium disilicate in the ring core and the high temperature in outer regions of the ring, where the pressing objects are usually located, leads to a very distinct reaction layer. This effect is exacerbated by a lengthy hold time and a long press time. The result is a rough...

Perfect pressing results through heat reflection inside the firing chamber Uniform Ring Heating An efficient heating chamber helps guarantee consistent pressing. To ensure all ring sizes are uniformly heated, the VARIO PRESS 300/300.e are equipped with a larger, high-quality heating element that completely lines the firing chamber with 7 layers of heating coils (see ADVANCED PRESS™ techniques). Zones without direct radiation that cause uneven heating are avoided. For optimal pre-drying, to avoid cracks and blisters, it is best to pre-dry at a constant temperature of 130°C. Utilizing the symmetrical...

Dental Ceramic oven Dental Press oven ADVANCED PRESS™ process for lithium disilicate ceramics Intelligent press (i-press) Z-Dry Mode 500 Programs, each individually programmable Custom pre-programmed for the client PFC (Power Fail Control) Programmable pressing pressure Impact and heat-resistant LCD glass touch display Scope of delivery: 1 VP300/300.e Press ceramic oven 1 Power cable 1 Flex-Ring ring system 100 g + 200 g 1 Pressing tray with tripod Insert 1 Firing tray 1 Vacuum hose incl. inline filter 1 Compressed air hose 2 m 1 Ring tongs 1 Tweezers, long 1 Spare fuse 1 USB flash drive 1 User's...