Hand & Wrist
1 / 64Páginas

Hand & Wrist

A comprehensive offering of volar plates, available in narrow, standard and wide, as well as in multiple shaft lengths. A variety of screw fixation options, aiming guides, and instrumentation allow for customization according to surgeon preference and complexity of the fracture. ■ Anatomically contoured to the distal radius for low profile repair and anatomic reduction ■ Comprehensive plate and screw selection ■ Variety of fixation options allow for multiple solutions ■ Straightforward instrumentation for optimal time efficiency Product Description Volar distal radius plate, Volar distal...

The fragment-specific plating options are designed to treat the three columns of the distal radius and ulna. Each plate addresses fractures of the individual fragments of each column and are ideal for specific indications that are difficult or impossible to treat with one volar plate. Product Description

(a) The wrist plating system along with the additional fragment-specific plating caddy provides a comprehensive solution for distal radius fracture management. Wrist Plating System (AR-8916S) (a) Product Description Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius plate, Volar distal radius...

The fragment-specific plating system (AR-8916FS) must be ordered in addition to the wrist plating system (AR-8916S). The caddy can be placed in the base of AR-8916C. The plates address all three columns of the distal radius and ulna. Highlights include the spanning plate, to address highly comminuted distal radius fractures and the volar hook plate that addresses volar rim fractures too distal to be captured by the volar DRP plate. Item Number Product Description Comprehensive Fragment-Specific Wrist Plating LT1-00080-EN Solutions Surgical Technique Wrist Plating System...

The PEEKPower DRP system presents an innovative plating system with anatomically shaped plates in a new material, CF PEEK (CF = carbon fiber). ■ Carbon-fiber-reinforced PEEK plate prevents cold welding and allows easy implant removal ■ Radiolucent material allows for unrestricted intra- and postoperative view of the fracture site ■ Excellent biocompatibility with bone-like stiffness that reduces stress shielding ■ Advanced anatomical plate design adapted to the “watershed line”

PEEKPower™ Distal Radius Plate Product Description Item Number Product Description Aiming adapter, multidirectional, standard, right, multidirectional Aiming adapter, multidirectional, standard, left, multidirectional Aiming adapter, unidirectional, standard, right, multidirectional Aiming adapter, unidirectional, standard, left, multidirectional

The headless compression screws are available in diameters of 2.5 mm and 3 mm. They can be used for osteotomy or fracture fixation as well as arthrodesis. The headless compression screws are housed in the forefoot set AR-8610S-01. ■ Compression created by different thread pitches ■ Headless ■ Cannulated ■ Self-drilling and self-tapping ■ Hexalobe connection (Torx) for Mini and standard compression FT screws ■ Short and long K-wires available (80 mm or 120 mm) ■ Titanium 2.5 mm and 3 mm Headless Compression Screws

Produced from solid enhanced PLLA, this screw offers interfragmentary compression and a headless profile for fracture and osteotomy fixation in periarticular applications. ■ Eliminates metal screw removal ■ Compression created by stepped thread pitch and tapered profile ■ Headless ■ Bioabsorbable (PLLA)

■ Cannulated, partially threaded screws ■ 2 mm, 2.4 mm, 3 mm, 4 mm ■ Self-drilling, self-tapping ■ Titanium alloy with type II anodization QuickFix™ Cannulated Screws Product Description The QuickFix cannulated screw system is a comprehensive set for fixation of the hand, wrist, and elbow. The titanium alloy screws are cannulated, partially threaded and are indicated for use in bone reconstruction, osteotomy, arthrodesis, joint fusion, fracture repair and fracture fixation.

The TRIM-IT Drill Pin is a bioabsorbable PLLA K-wire available in diameters of 1.5 mm and 2 mm. The 2 mm pin features a metal tip to facilitate predrilling. ■ Quick and easy placement techniques TRIM-IT Drill Pin® Disposables Kit, 1.5 mm x 100 mm

Intraosseous Ligament and Tendon Fixation I 19

The CMC Mini TightRope is a unique way of suspending the thumb metacarpal after trapezial resection or removal for treatment of CMC arthritis or thumb CMC instability and in revision cases with proximal migration after failed tendon reconstruction. The construct consists of two strands of #2 FiberWire which are fixed with two oblong stainless steel buttons for cortical fixation. CMC Mini TightRope® Repair Kit Published Articles Christopher A. Cox, M.D.; Dan A. Zlotolow, M.D.; and Jeffrey Yao, M.D.; Suture Button Suspensionplasty After Arthroscopic Hemitrapeziectomy for Treatment of Thumb...

QuickPass Tendon Shuttle® CMC Ligament Reconstruction Implant System CMC ligament reconstruction with the tenodesis screw system. The 4 mm x 10 mm tenodesis screw, available in BioComposite or PEEK, provides a strong and immediate fixation of the graft. The QuickPass Tendon Shuttle eases the passage of tendon grafts through bone tunnels, reducing surgical steps and saving valuable surgical time. Recommended Items for CMC Ligament Reconstruction Published Articles Robert W. Wysocki, M.D., Marks. Cohen, M.D., Susan Shott, PhD., John J. Fernandez, M.D., Thumb Carpometacarpal Suspension...

The Bio-Tenodesis screw system has been developed especially for the bony refixation of tendons and ligaments. With a comprehensive product line including BioComposite and PEEK, the system provides superior and immediate fixation for hand, wrist and elbow procedures such as LRTI for CMC arthroplasty, collateral ligament reconstruction, and biceps tendon repair. Bio-Tenodesis™ Screw Master Set (AR-1675S) Product Description Item Number BioComposite (a) Tenodesis screw with handled inserter, 3 mm x 8 mm (d) Tenodesis screw, 4 mm x 10 mm Tenodesis screw, 4.75 mm x 15 mm Tenodesis screw, 5.5 mm...