Catálogos >
Barco >
RGB Laser ODLSF-721

RGB Laser ODLSF-721
1 / 4Páginas

Excertos do catálogo

• Showing stereoscopic images using active shutter glasses • 2x more brightness than mainstream LED-lit video walls • 25% less power consumption at higher brightness levels • Front access eliminates need for rear maintenance area • More than 11 years of uninterrupted operation in 24/7 mode • Unmatched colors, focus, and contrast levels • Silent like never before ('library' noise level) Barco's RGB Laser ODLSF brings 3D to video walls. Powered with the latest RGB laser technology, these video walls deliver unseen brightness levels and vibrant colors, while offering a very low total cost of ownership (TCO). With its 10th generation of rear-projection video walls, Barco again raises the bar for critical infrastructure markets visualization. The RGB Laser ODLSF is therefore the first choice for video walls that require a guaranteed uptime and need to show stereoscopic images (using active shutter glasses). Providing 2x more brightness than mainstream LED-lit rear-projection video walls, the RGB laser series take away all brightness issues of earlier video walls. Because the high luminance allows operating under daylight conditions, control rooms can finally light up - which improves operator working conditions! Adding vibrant colors to this mix, that make all nuances clearly distinguishable, you make sure nothing is wrongly interpreted and situational awareness is enhanced. Front access eliminates the need for a rear maintenance area, for control rooms where space is a critical issue. Over 11 years of uninterrupted 24/7 operations With the RGB laser for 24/7 control rooms series, Barco takes another giant leap forward in terms of reliability. With a lifetime of at least 100,000 hours in eco-mode, operators enjoy a staggering 11.5 years of uninterrupted 24/7 operations. Redundancy of all critical components (including power supply, inputs, and drivers) make sure nothing is left to chance when it comes to

Abrir o catálogo na página 1

uptime. Unlike technology used by competitors and in non-24/7 meeting rooms, Barco's RGB laser display series doesn't need a rotating color wheel to operate. Since each color can be uniquely controlled and is not dependent on the segment of a color wheel, it provides color control like never before and eliminates color breakup. Automatic calibration and alignment The engine of Barco’s RGB laser for 24/7 control rooms is fully motorized. Installers and maintenance staff will never need to open up the individual modules to perfectly align the individual cubes of the video wall. Using a web...

Abrir o catálogo na página 2

PRODUCT SPECIFICATIONS RGB LASER ODLSF-721

Abrir o catálogo na página 3

PRODUCT SPECIFICATIONS RGB LASER ODLSF-721 Noise Level Less than 20 dB (measured from 3 meters in front) Heat dissipation 390 BTU/h (eco) Signal Redundant Dual link DVI (HDCP compliant) Minimum frame delay 1 frame in minimum frame delay (always applicable for 3D stereo projection and for mono projection with no scaling/cropping) < 2-3 frames in all other cases at full frame rate Signal processing Loop through Cropping and scaling with wall configuration (for mono projection only) Direct ethernet access Built in web server Graphical user interface All settings and operational parameters...

Abrir o catálogo na página 4