RAID S2
1 / 6Páginas

Excertos do catálogo

RAID-S2 Stationary Rapid Alarm and Identification Device Innovation with Integrity Defence CBRNE

General Specification Proved IMS technology The RAID-S2 is a gas trace detector for the detection of chemical warfare agents (CWA) and toxic industrial chemicals (TIC). It is based on proven ion mobility spectrometry technology. The RAID-S2 is specifically designed for long-term operations in a 24/7 environment with maintenance required only approx. once a year (depending on operation hours). Due to automatic polarity switching, the RAID-S2 continuously detects and identifies all relevant chemical warfare agents. The built-in microprocessor evaluates the recorded ion mobility spectra. The...

Abrir o catálogo na página 2

Filter Monitoring Filter monitoring In stationary facilities such as shelters, bunkers or within shipboard or vehicle chemical detection systems, the release of hazardous gas into the environment or the contamination of the interior can be prevented using NBC filter systems. For the protection of personnel, the filter function and the quality of both outdoor and filtered air should be monitored. This can be done with a RAID-S2 installed close to the NBC filter. It checks the passing air stream at two sampling points. RAID-S2 will be installed at the Fox vehicle for filter monitoring

Abrir o catálogo na página 3

Shipboard Nuclear and Chemical Detection Systems As part of shipboard detection systems, the RAID-S2 and other Bruker components can be integrated into complete CBRN detection networks. Shipboard chemical detection systems (SCDS) For ship borne use, the following configurations are available: RAID detectors as stand-alone devices RAID detectors with up to 5 remote control units (Ethernet) Several stationary RAID detectors with data system and NC Monitoring software RAID-S instruments are operating on board of the German Coast Guard Ship “Neuwerk” RAID-series product line The instruments can...

Abrir o catálogo na página 4

New Generation of NC Monitoring Software The improved version of the NC Monitoring Software allows several RAID (Rapid Alarm Identification Device) gas trace detectors and Bruker SVG2 radiation meters to be integrated in an operational monitoring system. Features of the NC Monitoring System: Remote control of RAID and SVG2 devices via standard serial interfaces Display of the detector states in various views, depending on the field of application Long time monitoring and, simultaneously, data recording of all instruments Configurable summary reports, using the collected device data Visual...

Abrir o catálogo na página 5

Technical Specifications RAID-S2 Detector module Humidity tested according MIL-810F up to 95 % Length x Width x Height Drying filter lifetime Weight MTBF Power consumption < 10 minutes (Operator level) < 45 minutes (Direct Support) Substances detectable Data interfaces Ethernet, RS422, Floating contacts for system status (Alarm/Error) Temperature range -20°C to +52°C (operation and storage) Compounds with proton or electron affinity Detection limits in the ppb and ppm concentration range CWA: GA, GB, GD, VX, HD, HN, L Test substances: MSAL, DPM TIC’s: Standard compounds: sulfur dioxid,...

Abrir o catálogo na página 6