LAD-01 Series
1 / 2Páginas

Driver for Linear Actuator LAD-01 Series LAD-01 Series LAD-01C - 012 for Open Collector LAD-01D - 012 for Line Driver Parameters and gains can be set by serial communication through USB cable. ■ Outside Drawing & Mounting Dimension ● This is a 3 phases sine wave PWM drive driver. ● This is the driver exclusive for Citizen Chiba Precision s miniaturized linear actuators. switched by input signal. ● Two types of preprogrammed gain setting can be Metal cover 4-φ4 hole Aluminum chassis to hold a circuit board ■ Circuit Configuration DC/DC CONV. Power Source to Drive Motor USB Transceiver Pulse Counter Forward Backward Micro Controller Serial I /O Parameters Setting Process /SVON /GLOW 3-Phases Alternating Current d-q Coordinate Converter Input /output Control Position Controller Speed Controller Motor Current Detecting Circuit Linear Actuator 3-Phases Alternating Current/ d-q Coordinate Converter 3-Phases Motor Drive Circuit /ORGF Speed Mechanical angle θ /LSFM /LSRM Speed/Position Signal Processor Pulse Counter Encoder

Input Power Source Voltage Continuous Rated Output Current Maximum Rated Output Current Control System Encoder Input Hall sensor LAD-01 Series DC 24V 3 Arms 10 A peak Position Control φ A, φ B, φ Z (MALS / MALB Series have no Z phase.) φ U, φ V, φ W (Hall IC) Positioning Accuracy Encoder Multiplication Function Command Multiplication Function Input Maximum Frequency ± 1 pulse of encoder resolution × 4 multiplication Only for 2 pulse systems: fixed to 4 multiplications, other systems: 1 multiplication Operating Ambient Temperature Range Operating Ambient Humidity Range Below 85%RH without...