Catálogos >
Cole-Parmer >
Hotplate stirrers, digital, CD162, SD162

Hotplate stirrers, digital, CD162, SD162
1 / 2Páginas

Excertos do catálogo

Hotplate stirrers, digital, CD162, SD162 - 1

Hotplate Stirrers, digital, Sophisticated stirrer hotplates offering digital control of both temperature and stirring speed. Comes complete with a detachable PTFE coated probe which when immersed in a liquid sample can very accurately control its temperature to within ±0.5°C even over a very long period of time. As the hotplate heats the sample to the set temperature, the advanced microprocessor automatically measures the rate of temperature rise to judge the capacity and nature of samples (e.g. oil or aqueous). It then optimises the heating rate to minimise overshoot and time to set point. An audible alert sounds when the set temperature has been reached. Both set and actual temperature of the sample are displayed simultaneously on a bright, easy to read vacuum fluorescent display. For maximum security, an independent safety circuit automatically sets to 20°C above the set temperature and shuts off the heater if the temperature exceeds this. Therefore, the hotplate is safe to leave on continuously, even unsupervised e.g. overnight. Stirring action gives much better temperature uniformity within samples because the liquid is mixed effectively. Powerful jf magnets and motor give stirring speeds up to 1300rpm and Jt ^ volumes up to 15 litres*. Stirring speed is set and displayed digitally so that exactly the, same speed can be used each time for reproducibility. * If the probe is unplugged, the temperature of the top plate can be set on the display. This can be useful for applications where accurate surface temperature is important such as warming microscope slides, microarrays and specialist electronics. There are two models to choose from: Model CD162 has a glass ceramic top plate, which is chemically resistant and gives very fast heat up times. Model SD162 has an aluminum / silicon alloy top plate which gives a very even plate temperature and quick response to changing set temperature. With fitting for retort rod and supplied complete with PTFE coated probe and 2 x 25mm PTFE coated stirrer bars. Stuart® Catalogue • Digital setting and control of both temperature and speed • Supplied complete with temperature probe for accurate control of liquid temperature • Advanced safety features: - Flashing "Hot" warning light - Independent safety circuit to protect against overheating • Choice of robust aluminium or chemically resistant ceramic tops

Abrir o catálogo na página 1

Hotplate stirrers, digital, CD162, SD162 - 2

CD162 and SD162 Hotplate Stirrers, digital, Technical Specification Plate material Glass ceramic Maximum plate temp. °C Maximum liquid temp, with probe °C silicon alloy Control accuracy with probe °C Maximum stirring capacity, litres * Electrical supply * Based on water contained in a 20 litre glass bottom boiling flask. Ordering Information Model Digital stirrer/hotplate, ceramic plate, 550W Digital stirrer/hotplate, aluminium plate, 750W Temperature probe, stainless steel Temperature probe, PTFE Protective cover Stuart® Catalogue Stuart® Catalogue

Abrir o catálogo na página 2