SlimLine
1 / 28Páginas

SlimLine Product Catalog & Manual SlimLine Product Catalog / Manual

SlimLine Product Catalog & Manual

Prosthetic Procedure Dual Abutment (Fix Type) 12 Angled Abutment (Fix Type) 13 Abutment Level Impression Components 14 Surgical Manual Surgical Drill Sequence 18 Prosthesis Manual Prosthetic Manual - Indirect 22 Prosthetic Manual - Direct 23

SlimLine Product Catalog & Manual

SlimLine Product Catalog & Manual S.L.A. Surface S.L.A. (Sandblasting with large grit and acid etching) · Higher bone-to-implant contact. · Faster bone formation on the surface. Human osteoblast · Well attached and proliferated human osteoblasts.

SlimLine Product Catalog & Manual SlimLine Characteristics Unit: mm One Body Design • S.L.A. surface enables immediate or early loading • Mini ball (Ø1.8) & metal socket make denture production easy • Wide range of choice for prosthetic options Mini Ball Type

SlimLine Product Catalog & Manual SlimLine Characteristics Unit: mm Mini O-Ring Retention Force Mini O-ring • Mini ball size (Ø1.8) • Mini o-ring type denture socket • Minimal-size denture socket • Mini o-ring are replaceable Angled Abutment Selecting direction is easy due to the Octa 45° rotation angles. • Slanted implanting is possible with the combination of angled abutment (15°, 25°). • Cement the final restoration onto the abutment. Double-threaded Design Tilting Angle • Increased thread height helps strengthen the initial stability. 15° Up to ±15 degrees of tilting angles to...

08 SlimLine Product Catalog & Manual Mini Ball Type Fixture Unit: mm, Scale 1 : 1 / mm

SlimLine Product Catalog & Manual 09

SlimLine Product Catalog & Manual Prosthetic Procedure Impression Technique and Restoration Selection Mini Ball Type Impression Coping Impression Coping Socket Spacer Page 11 Mini O-ring Page 11 Denture Socket Angled Abutment Dual Abutme

SlimLine Product Catalog & Manual Denture Components Unit: mm, Scale 1 : 1.5 / mm Denture Socket Female Socket

12 SlimLine Product Catalog & Manual

SlimLine Product Catalog & Manual Angled Abutment [Fix Type] Unit: mm, Scale 1 : 1.5 / mm

14 SlimLine Product Catalog & Manual Burn-out Cylinder Type

SlimLine Product Catalog & Manual 15 Surgical Kit SlimLine Surgical Kit XSLSKit includes XFDS 23 35

SlimLine Product Catalog & Manual Drill / Instrument Unit: mm, Scale 1 : 1 / mm Implant Driver Type Driver Type

SlimLine Product Catalog & Manual Manual Surgical Manual Prosthesis Manual

SlimLine Product Catalog & Manual Surgical Drill Sequence Drilling Sequence Guide . Final Drill: 1,000rpm / 30~45N.cm

SlimLine Product Catalog & Manual Surgical Process Implantation Process: Use the cap to start the implantation of the fixture. When the linkage between the cap and fixture deforms after reaching 5N·cm of tightening force, remove the disengaged cap and continue implantation using the MF tool in the surgical kit. Implant driver Please make sure that the fixture and the implant driver are engaged completely before loading. Complete engagement Incomplete engagement

SlimLine Product Catalog & Manual Prosthetic Process Fix Type Angled Abutment Cementation:

SlimLine Product Catalog & Manual Prosthetic Manual Ball Type Fixture Chairside SlimLine mini ball type ixture. Fixture installation. Produce the individual tray for denture impression Aix the impression coping on the mini ball type ixture. Apply the impression material. Take the inal impression with the prepared individual tray. Remove the tray from the patient's mouth. Image of the set inal impression (with impression coping). Ball analog Insert analogs into the coping embedded in impression. Create the master model.

SlimLine Product Catalog & Manual Prosthetic Manual - Indirect Indirect Lab Side Socket spacer. Fabrication of the denture with conventional method. Secure spaces for the female sockets. Assemble the female sockets onto the ball analogs that are embedded in the master model. Apply the resin to the secured area. Position the denture on the master model and wait for it to set completely. Female sockets are placed in the denture. Denture delivery.

SlimLine Product Catalog & Manual Prosthetic Manual - Direct Direct Lab Side Socket spacer. Fabrication of the denture with conventional method. Secure spaces for the female sockets. Connect the female sockets to the Mini Ball Abutments in the intraoral. Apply the resin to the secured area. Position the denture in the intraoral and wait for it to set completely. Female sockets are placed in the denture.

DENTIUM LONG-TERM CLINICAL DATA

over OVER A DECADE OF COMMITMENT TO THE BEST PRODUCTS FOR DENTISTS AND PATIENTS

SlimLine Product Catalog & Manual Copyright March, 2015 DENTIUM

SlimLine Product Catalog / Manual Specifications are subject to change without notice. Some products listed in this catalog are not available in the market due to pending approval. HEAD OFFICE 504 Gyeonggi R&DB Center, 105 Gwanggyo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea [443-270] T +82-31-888-5431 F +82-31-888-5430 E-mail biz_mail@dentium.com / www.dentium.com