LCP Compact Hand
1 / 28Páginas

{{requestButtons}}

Excertos do catálogo

LCP Compact Hand - 1

LCP Compact Hand 1.5. Instrument Technique Guide

Abrir o catálogo na página 1
LCP Compact Hand - 3

Introduction LCP Compact Hand 1.5 2 Surgical Technique Preparation 6 Product Information Screws 18 Plates, with Preassembled Short LCP Drill Sleeves 21 This description alone does not provide sufficient background for direct use of the instrument set. Instruction by a surgeon experienced in handling these nstruments is highly recommended For information on fixation principles using conventional and locked plating techniques, please refer to the technique guide for LCP Locking Compression Plate Reprocessing, Care and Maintenance of Synthes Instruments For general guidelines, function control...

Abrir o catálogo na página 3
LCP Compact Hand - 4

LCP Compact Hand 1.5. Instrument and implant module. Adaptable Locking Plates for Various Indications LCP Plate 1.5, straight Locking Plate 1.5, straight Locking T-Plate 1.5 Locking Strut Plate 1.5 Locking Y-Plate 1.5 Locking Condylar Plate 1.5 Minimized soft tissue irritation Option for preassembled drill sleeves Locking or non-locking screw option Low profile plates with rounded edges and highly polished surface to minimize soft tissue irritation. All plates are available either with or without short drill sleeves preassembled. Self-tapping screws with low-profile screw head sit flush...

Abrir o catálogo na página 4
LCP Compact Hand - 5

Part of the LCP Compact Hand System - Adaptable plates for different indications - Complete range of implants - Broad range of non-locking, locking and LCP plates to address various fracture patterns - The use of locking screws allows creating a fixed-angle construct, which is particularly advantageous in osteopenic bone or in fractures near the joint

Abrir o catálogo na página 5
LCP Compact Hand - 6

AO Principles In 1958, the AO formulated four basic principles, which have become the guidelines for internal fixation.1, 2 Those principles as applied to the LCP Compact Hand 1.5 are: Anatomic reduction Anatomic plate profile assists in reduction and facilitates restoration anatomical relationships. Stable fixation The combination of conventional and locking screws offers optimum fixation regardless of bone density. Locking screws create a fixed-angle construct, providing angular stability. Preservation of blood supply Limited-contact plate design reduces plate-to-bone contact and helps to...

Abrir o catálogo na página 6
LCP Compact Hand - 7

Indications − − − − Fracture fixation of the phalanges and metacarpals Osteotomies Arthrodeses Replantations and reconstructions of phalanges and metacarpals, particularly in osteopenic bone Synthes 5

Abrir o catálogo na página 7
LCP Compact Hand - 8

Preparation 1 LCP Compact Hand 1.5 (LCP, Locking straight and Locking Condylar Plates) Preoperative planning 0X.114.002 0X.114.004 Holes 4 6 Length 23 mm 36 mm Holes 6 12 0X.114.003 0X.114.005 Length 29 mm 59 mm AP View Lateral View Locking Condylar Plate 1.5 0X.114.014 Shaft 6 Holes Head 2 Holes 0X.214.006–024 Locking Screw Stardrive self-tapping, length 6–24 mm 0 1.5 mm, 0X.214.106–124 Cortex Screw Stardrive self-tapping, length 6–24 mm 6 10 15 20 24 0 1.5 mm, 6 10 15 20 24 1.15 Magnification 0 10 20 30 40 50 60 70 80 90 x=2: Stainless Steel x=4: Titanium 100 mm Synthes GmbH Eimattstrasse...

Abrir o catálogo na página 8
LCP Compact Hand - 9

Select implant Required sets (Titanium Implants) (Stainless Steel Implants) The plates of the LCP Compact Hand Module 1.5 are available either with or without short drill sleeves preassem- bled to the plate. The plates with preassembled drill sleeves are available sterile only. Select the plate according to the fracture pattern and the - This technique guide describes the application of the LCP Compact Hand 1.5 system using a Locking Condylar - Familiarity with the use of LCP plates or instruction from an experienced surgeon is recommended (see LCP Locking Compression Plate technique guide...

Abrir o catálogo na página 9
LCP Compact Hand - 10

Reduce fracture O Reduce the fracture under image intensifier control and, if necessary, fix with Kirschner wires or reduction forceps. The reduction method will be fracture-specific. Trim plate Trim the plate to the desired length using the bending/ cutting pliers and remove the burrs. Note: If the bending/cutting pliers are used on a plate with preassemble drill sleeves, the drill sleeves must first be removed from the plate. 8 Synthes LCP Compact Hand 1.5 Technique Guide

Abrir o catálogo na página 10
LCP Compact Hand - 11

Contour plate with thread 347.901 Pliers, flat-nosed, pointed, If necessary, contour the plate to suit anatomical conditions. Non-preassembled plates Use the bending pins for LCP Plates and thread the pins into the screw holes to contour the plate. (1) The plate can also be bent using two flat nosed pliers. Preassembled plates Use the non-threaded ends of the bending pins over the short threaded drill sleeves. (2) Note: If possible, bend the plate between the locking/ LCP holes. Do not deform the threaded part of the holes or over-bend the plate during bending as this may adversely affect...

Abrir o catálogo na página 11
LCP Compact Hand - 12

Position plate 399.970 Reduction Forceps with Points, ratchet lock Position the plate over the reduced fracture and, if necessary, fix provisionally with Kirschner wires or reduction forceps. (1) When using reduction forceps with points on a preassembled plate, insert one branch of the forceps in the cannulation of the short drill sleeve to secure the plate to the bone. (2) Optional instrument 398.819 Holding Forceps with Swivel Foot, for Plates 1.3 to 2.4, speed lock When using the holding forceps with swivel foot to hold the plate, remove the drill sleeves from the surrounding holes so...

Abrir o catálogo na página 12
LCP Compact Hand - 13

Determine screw type Depending on the individual case, cortex screws and/or locking screws may be inserted. Determine where locking screws will be used. The LCP and the locking holes accept both, cortex and lock- ng screws. The elongated hole only accepts cortex screws. If a locking screw is inserted first, ensure that the plate is held securely to the bone to prevent the plate from spinning as the screw locks into the plate. The final screw placement and the use of locking and cortex screws is determined by the fracture pattern. LCP hole (cortex or locking screw) Locking hole (cortex or...

Abrir o catálogo na página 13
LCP Compact Hand - 14

Insert screws in non-preassembled plate Insert locking screw LCP Drill Sleeve 1.5, for Drill Bits 01.1 mm 2-flute, for Mini Quick Coupling 319.003 Depth Gauge for Screws 0 1.3 to 1.5 mm, 03.114.009 Screwdriver Shaft Stardrive 1.5, with Holding Sleeve, length 66 mm, for Mini Quick Coupling with Mini Quick Coupling Optional instrument 03.1 14.002 Screwdriver Shaft, Stardrive 1.5, T4, short, self-holding, for Mini QuickCoupling Pre-drill the hole for a 1.5 mm locking screw using the 1.1 mm drill bit and the LCP drill sleeve 1.5. (1) Determine the screw length with the corresponding depth nsert...

Abrir o catálogo na página 14

Todos os catálogos e folhetos técnicos Depuy Synthes

  1. HEALIX ADVANCE

    4 Páginas

Catálogos arquivados

  1. 2.4 mm VA LCP™

    4 Páginas

  2. Power line II

    4 Páginas

  3. Concorde

    28 Páginas

  4. LCP Intercarpal

    31 Páginas

  5. LCS® COMPLETE™

    2 Páginas

  6. Synthes TPLO.

    8 Páginas

  7. SynFix-LR System

    56 Páginas

  8. CONDUIT™

    15 Páginas

  9. Brochure_FINAL

    2 Páginas

  10. DePuy Synthes

    81 Páginas

  11. Anspach

    3 Páginas

  12. Corail

    24 Páginas

  13. S-ROM® NOILES™

    68 Páginas

  14. Speed

    2 Páginas

  15. attune

    80 Páginas

  16. HAMMERLOCK® 2

    2 Páginas

  17. Polar

    4 Páginas

  18. Air Power Line II

    6 Páginas

  19. P F N A

    8 Páginas

  20. SKILL, DEDICATION,

    16 Páginas

  21. DURALOC

    16 Páginas

  22. MatrixNEURO

    8 Páginas

  23. Anspach XMax

    4 Páginas

  24. Air Pen Drive

    4 Páginas

  25. Colibri II

    4 Páginas

  26. Spine

    25 Páginas

  27. TomoFix

    60 Páginas

  28. Expert Tibia Nail

    84 Páginas

  29. Sacral Bars

    16 Páginas

  30. Pelvic C-Clamp

    20 Páginas

  31. LCP

    24 Páginas

  32. PFNA

    112 Páginas

  33. HCS 1.5, 2.4, 3.0

    36 Páginas

  34. LCP Wrist Fusion

    32 Páginas

  35. VA-LCP Elbow

    48 Páginas

  36. Distal Radius

    44 Páginas

  37. Olecranon

    30 Páginas

  38. LCP Hook Plate

    28 Páginas

  39. DHP & Olecranon

    4 Páginas

  40. LCP S-A

    4 Páginas

  41. Epoca

    4 Páginas

  42. Philos

    32 Páginas

  43. MultiLoc

    68 Páginas