Catálogos >
Electrothermal >
Heat transfer Fluid - High Temperature

Heat transfer Fluid - High Temperature
1 / 1Páginas

Excertos do catálogo

Heat transfer Fluid - High Temperature - 1

liquid temperature calibration baths Heat transfer Fluid - High Temperature This high temperature fluid offers industry a practically non-toxic, versatile bath fluid that has proven to be cost effective and thermally stable at temperatures up to +315ºC. This fluid has demonstrated excellent performance over a wide range of temperature without compromising economics or system integrity. Unlike the less stable mineral oil based fluid, our high temperature fluid provides the user with the confidence and reliability without the premium price of other fluids. Recommended temperature range +60 to +250°C. Benefits and features Low viscosity Improves bath uniformity and stability Enhanced heat-up and cool down rates Lower cost than glycol and silicone oil type fluids Safe and non-toxic Convenient 18 Litre (5 US gallon) containers This fluid is not for long term (more than a few hours) continuous use above 100ºC as excessive oxidation will occur. As with most high temperature fluids, a fume hood is recommended for operating temperatures above 150ºC. This fluid should only be used with the following plastics; ABS, Epoxy, Acetal, Teflon, Viton, Kalrez, Chemraz, Fiberglass, Graphites, Fluroelastimers. For all other plastic types contact Techne for specific recommendations. Technical Information Typical Properties – High Temperature bath fluid Catalog # FHTFHI Appearance Boiling point Composition Fire point Flash point Auto ignition temperature Specific heat Viscosity Minimum pumpability limit Odour Volumetric Expansion from 0ºC to 300ºC Thermal conductivity at 20ºC/68ºF Recommended use range Clear, Light brown, oily liquid. >330ºC/626ºF Synthetic organic hydrocarbon based liquid 210ºC/410ºF 180ºC/356ºF 330ºC/626ºF ~0.50 Btu/ (lb) (ºF) @ 50ºC (122ºF) 12cP @ 50ºC 0ºC/32ºF Bland 30.5% 0.135 W/m.K (0.078 Btu/ft. hr. ºF) 60ºC to 250ºC (122ºF to 482ºF) Techne high temperature bath fluid or its vapour, like many other heat transfer fluids, may ignite if released into the environment and exposed to hot surfaces, sparks, open flames, or other source of ignition. Ordering Information FHTFHI 18 litre size

Abrir o catálogo na página 1