Heat Transfer Fluid - Low Temperature
1 / 1Páginas

Excertos do catálogo

Heat Transfer Fluid - Low Temperature - 1

liquid temperature calibration baths Heat Transfer Fluid - Low Temperature The low temperature heat transfer fluid is engineered to offer non-toxic and low odour qualities at an affordable price. This fluid will satisfy the expectations of the most demanding modern day customer by providing an environmentally sound, thermally effective heat transfer fluid with a flash point of greater than 61°C (141°F) or greater. The fluid offers a low viscosity rating and unequalled heat transfer characteristics through its entire operating temperature range. Recommended temperature range -40ºC to 125ºC. When operator safety, environmental impact and price set the benchmark for your next open bath or closed loop heat transfer application, consider FHTFLO. A fume hood is recommended for open baths being operated at temperatures above +50ºC Benefits and features Low viscosity Improves bath uniformity and stability Enhanced heat-up and cool down rates Lower cost than glycol and silicone oil type fluids Safe and non-toxic Convenient 18 Litre (5 US gallon) containers NOTE: This fluid should only be used with the following plastics; Acetal, Aramid Fiber, Chemraz (FFKM), Epoxy, Fluorocarbon (Film), Flouroelastimer, Glass Fibre, Gylon style 3500,3504 & 3510, Kalrez, Kel-F (CTFE), PEEK, Polytetrafluor-ethylene, Teflon (All), Teflon Encapsulated Silicone, Teflon Encapsulated Viton, Teflon Impregnated Fibreglass, Viton, Resin Impregnated Carbon Graphite. Metal Compatibility; Aluminium, Brass, Bronze, Carbon Steel, Cast Steel, Copper, Copper Nickel, Hasteloy, Inconel, Monel, Nickel, Stainless Steel, Tantalum, Titanium. For all other material types contact Techne for specific recommendations. Technical Information Typical Properties – Low Temperature bath fluid Catalog # FHTFLO Appearance Boiling point Composition Fire point Flash point (Closed cup) Flash point (Open cup) Auto ignition temperature Critical temperature (estimated) Critical pressure (estimated) Average molecular weight Dielectric constant Thermal conductivity at 0ºC/68ºF Recommended temp. range open system Recommended temp. range closed system 1 Techne high temperature bath fluid or its vapor, like many other heat transfer fluids, may ignite if released into the environment and exposed to hot surfaces, sparks, open flames, or other source of ignition. Ordering Information FHTFLO

Abrir o catálogo na página 1

Todos os catálogos e folhetos técnicos Electrothermal

  1. Circulating Baths

    12 Páginas

  2. Microfluidics

    4 Páginas

  3. Bunsen Burners

    1 Páginas

  4. Lab Essentials

    100 Páginas

  5. BioPharma Processing

    131 Páginas

  6. Digi-Mantles

    3 Páginas

  7. Controllers

    6 Páginas

Catálogos arquivados

  1. TechneWorks

    1 Páginas

  2. Tecal 425F

    1 Páginas

  3. Tecal 425S/H

    1 Páginas

  4. Tecal 650F

    1 Páginas

  5. Tecal 650S/H

    1 Páginas

  6. F0885 Alundum

    1 Páginas

  7. ElectroVMV_APR13

    1 Páginas

  8. STEM Integrity 10

    1 Páginas

  9. Stirrers

    7 Páginas

  10. Electromantle

    8 Páginas