Catálogos >
FAULHABER Drive Systems >
Series 1506...SR

Series 1506...SR
1 / 2Páginas

Excertos do catálogo

Flat DC-MicromotorsPrecious Metal Commutation Series 1506 ... SR 1 Nominal voltage 2 Terminal resistance 3 Efficiency, max. 4 No-load speed 5 No-load current, typ. (with shaft 0 0,8 mm) 6 Stall torque 7 Friction torque 8 Speed constant 9 Back-EMF constant 10 Torque constant 11 Current constant 12 Slope of n-M curve 13 Rotor inductance 14 Mechanical time constant 15 Rotor inertia 16 Angular acceleration 17 Thermal resistance 18 Thermal time constant 19 Operating temperature range: - motor - winding, max. permissible 20 Shaft bearings 21 Shaft load max.: - with shaft diameter - radial at 3 000 min-1 (3 mm from bearing) - axial at 3 000 min'1 - axial at standstill 22 Shaft play: - radial - axial 23 Housing material 24 Mass 25 Direction of rotation 26 Speed up to 27 Number of pole pairs 28 Magnet material 0,03 0,2 plastic 4,3 clockwise, viewed from the front face 16 000 2 NdFeB Rated values for continuous operation Rated values are calculated with nominal voltage and at a 22°C ambient temperature. The Rh2 value has been reduced by 0%. Note: The diagram indicates the recommended speed in relation to the available torque at the output shaft for a given ambient temperature of 22°C. The diagram shows the motor in a completely insulated as well as thermally coupled condition (Rth2 50% reduced). The nominal voltage (Un) curve shows the operating point at nominal voltage in the insulated and thermally coupled condition. Any points of operation above the curve at nominal voltage will require a higher operating voltage. Any points below the nominal voltage curve will require less voltage. For notes on technical data and lifetime performance © DR. FRITZ FAULHABER GMBH & CO. KG refer to "Technical Information". Specifications subject to change without notice.

Abrir o catálogo na página 1

Orientation with respect to motor terminals ±10° 1506 N ... SR Options Example product designation: 1506N012SR-3359 Option 3327 F X3697 3359 Twin Leads Single Leads Flange Second shaft end For motors with twin leads (PVC), length 70 mm, red (+) / black (-) For motors with single leads (PTFE), length 150 mm, red (+) / black (-) Square mounting flange (17,5 x 17,5 mm) Length 4,5 mm Product combination Precision Gearheads / Lead Screws Cables / Accessories For notes on technical data and lifetime performance refer to “Technical Information”. Drive Electronics To view our large range of...

Abrir o catálogo na página 2

Series 1506...SR 1 / 2Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos FAULHABER Drive Systems

Series 1506...SR
1 / 2Páginas