Gear Pump-Motor Unit DGD Pro series
1 / 2Páginas

The Fluid-o-Tech® DGD PRO direct drive gear pump has an AISI 316L stainless steel housing and Peek gears. The ports are 1/8” GAS in line. Designed to extend the performance of the DGD series pumps in both flow rate and pressure, the DGD PRO pump-motor unit is built to handle food grade liquids in compliance with the most stringent standards. The DGD PRO delivers great performances in a small footprint and it is available with brush and brushless drives to cover the widest range of applications and requirements. • Food equipment • Water treatment • Lubrication • Sanitization • Fluid transfer TECHNICAL INFORMATION Dimensions in mm [inches] www.fluidotech.com

Direct drive gear pump-motor units. DGD PRO Absorbed current [Ampere] Flow Rate Note: Characteristics with water at 20 °C (68 F) and without relief valve. Fluids different from water must be validated by the Customer. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request. Use a filter before the pump inlet no larger than 10 micron Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Via Leonardo da Vinci, 40 20094 Corsico, Milano,...