Elastic
1 / 2Páginas

MATERIAL DATA SHEET Elastic Elastic Resin for Soft Flexible Parts Our softest Engineering Resin, this 50A Shore durometer material is suitable for prototyping parts normally produced with silicone. Choose Elastic Resin for parts that will bend, stretch, compress, and hold up to repeated cycles without tearing. Wearables and consumer goods prototyping Medical models and devices Compliant features for robotics Special effects props and models To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof.

1 Material properties can vary with part geometry, print orientation, print settings and temperature. 2 Data was obtained from parts printed using Form 2, 100 pm, Elastic settings, washed in Form Wash for 20 minutes and postcured with Form Cure at 60C for 20 minutes. 3 Tensile testing was performed after 3+ hours at 23 °C, using a Die C dumbbell and 20 in/min cross head speed. 4 Tear testing was performed after 3+ hours at 23 °C, using a Die C tear specimen and a 20 in/min cross head speed FORMLABS MATERIAL PROPERTIES - ELASTIC: Photopolymer Resin for Form 2 3D Printers