Catálogos >
Formlabs >
Rigid

Rigid
1 / 2Páginas

Excertos do catálogo

MATERIAL DATA SHEET Rigid Photopolymer Resin for Form 2 Rigid Resin is reinforced with glass to offer very high stiffness and a polished finish. This material is highly resistant to deformation over time and is great for printing thin walls and features. Supports print resolutions: 100 and 50 microns. Requires Resin Tank LT. To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof.

Abrir o catálogo na página 1

1 Material properties can vary with part geometry, print orientation, print settings, and temperature. 2 Data was obtained from green parts, printed using Form 2, 100 pm, Rigid settings, without additional treatments. 2 Data was obtained from parts printed using Form 2, 100 pm, Rigid settings and post-cured with a Formcure for 120 minutes at 80 C. FORMLABS MATERIAL PROPERTIES - RIGID: Photopolymer Resin for Form 2 3D Printers

Abrir o catálogo na página 2