CENTRAL GAS SUPPLY
1 / 48Páginas

HIGH PRESSURE MANIFOLDS AND OUTLET POINTS FOR INDUSTRIAL GASES Security inaction

Sales office Sales representation Headquarters Production units Stock point GCE has almost 100 years of experience in the manufacture and supply of high pressure gas equipment. During this time the GCE product range has increased dramatically. Today´s product portfolio fits a large variety of applications, from simple pressure regulators and blowpipes for cutting and welding to highly sophisticated gas supply systems for the medical, electronic and analytical industries. GCE GROUP INCLUDES FOUR BUSINESS AREAS: ● ● ● ● Cutting & Welding Process Application Medical High Purity The origins of...

HIGH-PRESSURE MANIFOLD EXTENSION UNITS APPLICATION GENERAL INFORMATION 1

CENTRAL GAS SUPPLY Central gas supply systems (CGS) are in generally based on high volume gas delivery, on-side gas stocking in special containers and gas distribution from these high capacity sources up to the final applications. Gas can be delivered from production plant either in liquefied form mainly using cryogenic systems or in gaseous high-compressed form using in most cases steel cylinders or bundles of cylinders. When CGS is installed on-side and used, gas goes from the source (stabile or mobile cryogenic vessel with vaporizer, cylinders bundle, cylinder or special container)...

CENTRAL GAS SUPPLY SYSTEM SCHEME HF-SET UNISET+ DINSET

HIGH PRESSURE MANIFOLDS OVERVIEW MU LINE (SEE PAGES 7-9) Simple units for cylinder supply and panels for mobile or on-site applications. M70 LINE (SEE PAGES 10-12) Gas manifolds for small- and middle-flow applications. Simple manifolds and manual changeover units, semiautomatic and automatic units.

HIGH PRESSURE MANIFOLDS OVERVIEW M400 LINE (SEE PAGES 13-15) Gas manifolds for high-flow applications. Simple manifolds, manual changeover and semiautomatic units. MB LINE (SEE PAGE 16-18) Gas manifolds range with compact inlet Manyflow valve block. Reliable solution for different gases and many applications MF LINE (SEE PAGE 19-20) Compact semiautomatic gas manifolds range with Maxiflow unit. For different gases and applications, one- or double-stage design.

OUTLET POINTS OVERVIEW DINSET (SEE PAGES 26-28) • Outlet points for different gases and applications • Dincontrol regulator type • Design with pressure gauges, flow gauges or flowmeters • Available with different outlet pressure and flow rate ranges • Single, double or triple units UNISET (SEE PAGES 29-30) • Outlet points for applications and gases variants • Unicontrol regulator type • Available as single, double or twin units • Design with pressure gauges, flow gauges or flowmeters with different outlet pressure and flow rate ranges UNISET+ (SEE PAGE 31) • Outlet points with steel...

SE LINE Basic unit with one inlet and one outlet, shut-off valve and pressure regulator, with inlet filter and non return valve. Designed for small or middle gas consumptions for one cylinder or cylinder bundle. Gas,Pressure Inlet Outlet TECHNICAL DATA High pressure manifold extension unit. SE-Line manifolds contain collecting tubes in adjustable positions. The axial distance between tube and wall bracket is changeable. The tube as well as wall bracket are made of stainless steel. Connection blocks are made of brass. One block includes always port for pressure gauge or contact...

New concept of acetylene manifold either for stabile installation or for mobile usage with bundles or cylinders. Panel can be mounted directly at the wall with configuration as shown at the picture. When hanging kit in mounted on, panel can be hanged directly at the bundle or cylinders pallet frame. This configuration fulfills requests of outdoor on-side applications. It is designed in accordance with ISO 14 114 with automatic quick - acting shut-off valve and regulor, both tested in accordance with ISO 15 615. There is also flashback arrestor GVA 90 downstream regulator. GVA 90 (EN 730-1,...

New concept of gas manifold with similar features as MU70-M. O, D, N, CO2 variant is equipped by high-flow regulator MR400. Manifold unit with mounted hanging kit is shown at the picture. Hanging kit contains two stainless steel hangers, screws with nuts and washers and also two outlet adaptors with threads G1/4" and G3/8" for direct hose installation. This kit can be used in combination with MU70-M or MU400-M manifolds. Description Gas,Pressure Inlet Outlet TECHNICAL DATA Propane variant is with high-flow regulator and contains also high-flow flashback arrestor Simax 3 at the...

MM70-1 ACETYLENE Gas manifold panel for different gases with inlet pressure up to 300bar. Manifold contains inlet x-block with non return valve and filter, purge valve and second inlet from site to install potentially extension unit. Purge valve can be used for pressure release when cylinder/bundle hose is dismounted. There is also high pressure shut-off valve, regulator with pressure relieve valve and outlet ball valve mounted at the stainless steel panel. Regulator type UC 500 Acetylene variant of MM70-1 manifold for cylinder service. It is designed and produced in accordance with ISO...

Manual changeover manifold for different gases with inlet pressure up to 300bar. At both inlet sides is placed x-block with non return valves and filters, purge valves and second inlets from sites for extension units. Shut-off valves, regulator with pressure relieve valve and outlet ball valve as well as other components are mounted at the stainless steel panel. Maximal flow rate 50 Nm3/h Temperature range from -20 °C to 60 °C Inlet Outlet MM70-2 ACETYLENE Acetylene variant of MM70-2 manual changeover manifold for cylinder service. It is designed and produced in accordance with ISO...

Automatic change over manifold mounted onto a stainless steel panel and consists of two pressure regulators with inlet and outlet pressure gauge, a switch unit with two magnetic valves including control unit and signal monitoring. Automatic change over for uninterrupted gas flow. Solenoid valves guarantee a maximum of exhaustion of the gas sources (cylinders or bundles). Acoustic and optical gas leakage monitoring via contact pressure gauges and signal device. In each case, after falling below boundary values (at the pressure gauges preset delay period) gas supply will be changed over to...