TECHLINE CATALOGUE
1 / 48Páginas

Complete range

Sales office Sales representation Headquarters Production units Stock point GCE´s main business originally concentrated on the oxy-acetylene cutting and welding market, but with almost 100 years of experience in the handling of high pressure gases, the product range has grown rapidly. Today´s product portfolio fits a large variety of applications, from simple pressure regulators and blowpipes for welding and cutting to highly sophisticated gas supply systems for the medical and electronics industry and analytical laboratory equipment. GCE Group includes four business areas: & Welding •...

Subject to change without notice

MINI-300 SERIES - COMPACT 'LOW FLOW REGULATOR SPECIAL FEATURES • 38 mm diameter body provides small foot space • Fully supported'sensitive'pistons with low pressure and high pressure outlet options • All 316SS wetted parts including bonnet with panel mounting as standard • 'Soft' seating area perpendicular to flow stream to minimise particle damage The MINI-300 provides an economical, lightweight, and versatile regulator range, designed for customers who want accurate control from a compact unit. The standard units utilise two piston sensing options to allow pressure control from 5 psi to...

performance charts EXAMPLE PORTING OPTIONS: Subject to change without notice INSTALLATION DIMENSIONS:

LF-300 SERIES - ‘LOW FLOW’ PRESSURE REDUCING REGULATOR DIAPHRAGM SENSED FOR OUTLET CONTROL TO 35 BAR / 500 PSI Special features metal diaphragm • Metal toarea protected andsealing on the body of the regulator centralized • Sealing compact design • Lightweightsensitive diaphragm element • Strong and • High Accuracy Description The LF-300 has been designed with quality and reliability in mind, with genuinely unique features designed into this single stage regulator. Finite Element Analysis, combined with physical cycle tests, created an Inconel X750 diaphragm that lasts 50% longer than a...

Subject to change without notice INSTALLATION DIMENSIONS:

TS-300 SERIES - TWO STAGE PRESSURE REDUCING REGULATOR DIAPHRAGM SENSED FOR OUTLET CONTROL TO 25BAR / 360PSI Special features metal sealing • Metal toarea protecteddiaphragm within the body of the regulator and centralized • Sealingdecaying pressure effect • 0.04% relief valve option • ‘Interstage’ Description The TS-300 provides stable pressure control under decaying cylinder pressures. The first stage of the regulator is set to 35 bar to allow maximum flow capability through the regulator. Systems • Gas and Liquid AnalyzerAssemblies • Gas Cylinder Regulator • Carrier gases & Research Labs...

INSTALLATION DIMENSIONS: Subject to change without notice

LF-230 SERIES - Low Flow Pressure Regulator with sensitive elastomeric diaphragm Special features • 316L SS Machined Wetted Parts diaphragm • Large sensitive elastomeric150psi control range 10bar / to • 0.1bar todecaying1.5psi pressure effect inlet • Minimal rates to 30Nm³/hr (@ max P2) • For flow Technical Data Max rated inlet pressure Max outlet ranges Body and trim Leakage Seat diameter Weight 230bar (3300psi) Diaphragm: 10bar (150psi) 316 St St. Bubble tight to ANSIFCI 70-3-2004 2.5 mm Approx 1kg STANDARD MATERIALS OF CONSTRUCTION Body and Bonnet 316SS Seat PCTFE Diaphragm (P2 max...

FLOW RATE - SLPM [SCFM] Nitrogen INSTALLATION DIMENSIONS: 115 (approx.) Subject to change without notice

LF-301 SERIES - ‘LOW FLOW’ PRESSURE REGULATOR PISTON SENSED FOR OUTLET CONTROL TO 180 BAR / 2600 PSI Special features • Compact design • Economical • 316SS Bonnet • Max 300 bar inlet Description The LF-301 provides a compact and economical solution for controlling pressures up to 180 bar on low flow applications. Ideal for first stage pressure let down where basic pressure control is required. A small piston sensing element allows low torque adjustment with a range of springs with fine pressure adjustment. • Gas Cylinder regulator assemblies rigs • Pressure testAir Lines • Instrument carts...

Subject to change without notice INSTALLATION DIMENSIONS:

XHS-300 SERIES - DIAPHRAGM SENSED PRESSURE REGULATOR WITH SINGLE 100W HEATER Special features • IECEx, ATEX certified to EEx d IIC T3 • 100 W Heater cartridge Convoluted diaphragm • Strong Inconel X750board with 115 V or 230 V supply • Easy to wire potted • Fully serviceable design cable supply • Optional entry points for Description An economical heated regulator available in ‘side entry’ or ‘in-line’ heat transfer options to maintain sample gases in their vapour state. The ‘in-line’ design maximizes the heat transfer area via a unique spiral machined heater sheath, which mixes the gas and...

SUPPORT MOUNTING ATEX LABEL SECURED BY 4 SELF TAPPING DRIVE SCREWS INSTALLATION DIMENSIONS: Order code Outlet ranges Body material (Examples*) K- PCTEE (max 210 bar inlet) P- PEEK (max 300 bar inlet) Refer to page above Check Page 47 = Gauge Port locations Subject to change without notice Basic Model Voltage supply Porting configuration * Maximum inlet pressure can be set to specific requirments

XHR-300 SERIES - ‘LOW FLOW’ ELECTRIC AND STEAM HEATED REGULATOR DIAPHRAGM SENSED Special features d • ATEX certified to EEx100IIC T3 for pre heat and re-heat of sample gas. Oxygen sample - Inconel X750 W heaters • Dual, independent, strength Diaphragm for extra area transfer • Largetosurfacecircuit for heatwith 115 V or 230 V supply wire • Easy Junction Boxboard 7 mm mounting supports. with • Stylish • Fully serviceable design cable supply • Optional entry points for Description Certified to ATEX directive 94/9/EC, the XHR-300 helps to maintain saturated gases in their vapourised state due...

INLET PORT OUTLET PORT OUTLET 2 HOLES FOR M8 FIXING SCREWS Subject to change without notice