PHYSICIAN ELECTRONIC SCALES
1 / 23Páginas

{{requestButtons}}

Excertos do catálogo

PHYSICIAN ELECTRONIC SCALES - 1

PHYSICIAN ELECTRONIC SCALES BALANCE ELECTRONIQUE BALANZA ELECTRONICA OPERATION MANUAL MODE DEMPLOI CANADIAN SMHDAHPt

Abrir o catálogo na página 1
PHYSICIAN ELECTRONIC SCALES - 2

MODELS: 597KL, 599KL, 752KL Thank you for your purchase of this product. Please read this manual carefully and keep it handy for ready reference. Merci d’avoir acheté ce produit. Veuillez lire attentivement ce manuel et le garder à portée de main pour pouvoir le consulter à tout moment Gracias por la adquisición de este producto. Lea por favor este manual cuidadosamente y manténgalo a su alcance para una pronta referencia. .CAUTION AND WARNING. To prevent injury and damage to your scale, please follow these instructions very carefully • • • • • • Do not transport the scale while the...

Abrir o catálogo na página 2
PHYSICIAN ELECTRONIC SCALES - 3

.SET UP. Tools Needed –5mm Hex Driver, Phillips Screwdriver, Flat-Head Screwdriver (for 597KL height rod mount only) Materials Included –4-Hex Head Machine Screws; 1-Phillips Screw (model 597and 599KL, 2 Phillips Screws (model 752KL); 1-Custom Height Rod Attachment Screw, for models 597 and 599; 1 AC adapter holder with 2 sheet-metal screws. Place batteries in battery holder at base of scale (if using battery operation – we recommend the use of EVEREADY Energizer® e2™ batteries). Feed load cell wire through pillar base. Screw in 4 hex screws with (5mm) hex driver. Insert pillar into pillar...

Abrir o catálogo na página 3
PHYSICIAN ELECTRONIC SCALES - 4

For model 752KL, insert display module into wall mount/table top adapter. For wall mount place display module in adapter (see diagram 5a). For table-top place display module in adapter (see diagram 5b). Use 2 Phillips screws to secure the adapter to the display module. For model 597KL, insert height rod into pillar base slot (see diagram 6a). Feed screw into hole. Use Flat-Head Screwdriver to tighten height rod to scale from the back (see diagram 6b). Remove protective plastic film from display For models 597KL and models 599KL, attach the AC adapter holder with 2 Phillips sheet metal...

Abrir o catálogo na página 4
PHYSICIAN ELECTRONIC SCALES - 5

GENERAL This section provides instructions for maintenance, cleaning, troubleshooting and operator replaceable parts for the Physician Digital Scale. Maintenance operations other than those described in this section should be performed by qualified service personnel. .MAINTENANCE. Before first use and after periods of non-use, check the scale for proper operation and function. If the scale does not operate correctly, refer to qualified service personnel. 1. Check overall appearance of the total scale for any obvious damage, abuse, etc. 2. Inspect condition of AC adapter cord and prongs,...

Abrir o catálogo na página 5
PHYSICIAN ELECTRONIC SCALES - 6

.CALIBRATION PROCEDURE. This scale has been calibrated at the factory and does not require re-calibration prior to use. The calibration procedure may be performed using a known weight in either kilograms or pounds. Simply set the scale for the desired unit of measure using the KG/LB key and start the calibration procedure. The following instructions assume the scale is set to measure lbs. The calibration is performed using kg or lb, according to the unit of measure used upon entering into the calibration path. Note: The calibration weight must be no less than 60 lb (28 kg) and no more than...

Abrir o catálogo na página 6
PHYSICIAN ELECTRONIC SCALES - 7

Parts List Key# Part No. Description 1 T597DISP DISPLAY ASSEMBLY 2 T42-014900-00 KEYPAD 3 T16-088121-00 DISPLAY MODULE COVER 4 T19-019051-00 M3 x 12MM PLASTIC SELF TAPPING SCREWS 5 T63-004400-00 PCB WITH LCD DISPLAY 6 T16-088321-00 DISPLAY MODULE BASE 7 T19-024051-00 M3 x 12MM ZINC PLATED MACHINE SCREWS 8 TRIMMER COVER TRIMMER COVER 9 COPPER-STAND COPPER-STAND 10 T16-088521-00 WALL MOUNT BRACKET 11 T19-022851-00 M3 x 12MM ZINC PLATED MACHINE SCREWS 12 PLATED WASHER Φ3 ZINC PLATED WASHER 13a T597NECK NECK/SWIVEL ASSEMBLY - 25° 13b T599NECK NECK/SWIVEL ASSEMBLY - 45° 14a T16-089021-00 PILLAR...

Abrir o catálogo na página 7
PHYSICIAN ELECTRONIC SCALES - 8

LIMITED WARRANTY What does the Warranty Cover? Pelstar LLC scales are warranted from date of purchase against defects of materials or in workmanship for a period of one (1) year. If product fails to function properly, return the product, freight prepaid and properly packed to Pelstar. See “To Get Warranty Service” below for instructions. If manufacturer determines that a defect of material or in workmanship exists, customers' sole remedy will be repair or replacement of scale at no charge. Replacement will be made with a new or remanufactured product or component. If the product is no...

Abrir o catálogo na página 8
PHYSICIAN ELECTRONIC SCALES - 9

MODÈLES : 597KL, 599KL, 752KL Merci d’avoir acheté ce produit. Veuillez lire attentivement ce manuel et le garder à portée de main pour pouvoir le consulter à tout moment .MISE EN GARDE ET AVERTISSEMENT. Pour prévenir les blessures et les dommages à votre balance, veuillez suivre ces instructions très soigneusement • • • • • • Ne transportez pas la balance pendant que la plateforme est chargée. Pour un pesage précis, la balance doit être placée sur une surface plate et stable. Pour un pesage précis, vérifiez le bon fonctionnement de la balance conformément à la procédure décrite dans ce...

Abrir o catálogo na página 9
PHYSICIAN ELECTRONIC SCALES - 10

.INSTALLATION. Outils requis –goupille à six pans de -5mm, tournevis cruciforme, tournevis à tête plate (pour le montage de la tige de grandeur du modèle 597KL seulement) Matériaux compris –4 vis à métaux à tête à six pans, 1 vis cruciforme (modèles 597 et 599KL), 2 vis cruciformes (modèle 752KL), 1 vis de fixation de la tige de grandeur personnalisée pour les modèles 597 et 599, un support à adaptateur c.a. avec 2 vis à tôle. Placer les piles dans le support à piles dans la base de la balance (si vous choisissez l’alimentation par piles, nous recommandons les piles EVEREADY Energizer®...

Abrir o catálogo na página 10
PHYSICIAN ELECTRONIC SCALES - 11

Pour le modèle 752KL, insérer le module d’affichage dans l’adaptateur de montage mural ou sur table. Pour le montage mural, placer le module d’affichage dans l’adaptateur (se reporter au diagramme 5a). Pour le montage sur table, placer le module d’affichage dans l’adaptateur (se reporter au diagramme 5b). Utiliser deux vis cruciformes pour fixer l’adaptateur au module d’affichage. Pour le modèle 597KL, insérer la tige de grandeur dans la fente de la base du pilier (se reporter au diagramme 6a). Insérer la vis dans le trou. Utiliser un tournevis à tête plate pour serrer la tige de grandeur à...

Abrir o catálogo na página 11

Todos os catálogos e folhetos técnicos Health O meter Professional

  1. THE 2900KL-AM

    2 Páginas

  2. HOM Product cat

    72 Páginas

  3. 894KLT

    2 Páginas

  4. 3400KG

    2 Páginas

  5. 2600KL

    2 Páginas

  6. 3001KL-AMX

    2 Páginas

  7. 2000KL

    2 Páginas

  8. 142KL

    2 Páginas

  9. 160KG

    2 Páginas

  10. 160LB

    2 Páginas

  11. 160KL

    2 Páginas

  12. 100LB & 100KG

    2 Páginas

  13. 400KL

    2 Páginas

  14. BCS-G6

    2 Páginas

  15. 499KLHR

    2 Páginas

  16. PORTROD

    1 Páginas

  17. Model 2101KL

    21 Páginas

  18. Model 600KL

    13 Páginas

  19. Model 349KLX

    23 Páginas

  20. Model 498KL

    23 Páginas

  21. 597KL

    2 Páginas

  22. 594KL

    2 Páginas

  23. 499KL

    2 Páginas

Catálogos arquivados

  1. 596KL

    2 Páginas

  2. 222KL

    2 Páginas