Catálogos >
INOXPA >
DCS

DCS
1 / 3Páginas

Excertos do catálogo

FT 01.531.33.01EN (0) 2022/04 pàg. 1/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com DCS Twin Screw Pump A P P L I C AT I O N The DCS is a twin screw pump, with sanitary design, suitable for use in the dairy, food and beverage, cosmetics, etc. The flow is uniform and in an axial direction, so there are no changes of volume or physical properties of the product. Therefore it is an ideal pump for handling shear-sensitive fluids. It has a high suction lift capability with very low NPSH values. It is capable of pumping liquids with high viscosity, but also with low viscosity, so it can be used as a CIP-supply pump. The design ensures a fully cleanability and drainability. D E S I G N A N D F E AT U R E S The DCS pumps are available in two versions: close coupled and bare shaft construction. They have a two part design (pumpcasing and separate flange). The mechanical seals have a sanitary design. When required, other materials can be used. T E C H N I C A L S P E C I F I C AT I O N S Materials Parts in contact with the product Bearing support Gear housing Gaskets in contact with the product 1.4404 (AISI 316L) 1.4401 (AISI 316) aluminium EPDM Mechanical seal Rotary part Stationary part Gasket silicon carbide (SiC) silicon carbide (SiC) EPDM Surface finish Internal External

Abrir o catálogo na página 1

Operating limits Maximum flow Maximum differential pressure Maximum working pressure Temperature range (EPDM) Temperature SIP Maximum speed Maximum solid size (mm) pag. 2/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com Triphasic induction motor with B5 flange and B3 legs for monoblock version. Triphasic induction motor with B3 legs for bare shaft version. In both versions the motor complies with the IEC standards, efficiency...

Abrir o catálogo na página 2

MONOBLOCK PUMP DIMENSIONS pag. 3/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com BARE SHAFT PUMP DIMENSIONS

Abrir o catálogo na página 3

DCS 1 / 3Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos INOXPA

DCS
1 / 3Páginas